Download  Print this page

Removing The Embroidery Unit - Brother 882-W04 Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

c
Turn the main power to ON.
→ The following message will appear.
d
Press
.
→ The carriage will move to the initialization position.

■ Removing the Embroidery Unit

a
Press either
.
→ The carriage will move to the removal position.
CAUTION
• Always remove the embroidery frame before
pressing
. Otherwise, the frame may
strike the embroidery foot, and possibly cause
injury.
• The embroidery unit will not fit in the storage
case if this step is not done.
b
Turn the main power to OFF.
Note
• Be sure to turn off the machine before
removing the embroidery unit, otherwise
damage to the machine may result.
or
, then press
c
Hold down the release button, and pull the
embroidery unit away from the machine.
a Release button
CAUTION
• Do not carry the embroidery unit by holding
the release button compartment.
BEFORE EMBROIDERING
5
189

Advertisement

Table of Contents

Troubleshooting

   Related Manuals for Brother 882-W04

This manual is also suitable for:

882-w05Nv6700d

Comments to this Manuals

Symbols: 0
Latest comments: