Brother 882-W04 Operation Manual page 97

a
Select a stitch.
b
Attach presser foot "J".
* Attach presser foot "N" when you select
c
Hold the thread tail and fabric with your
left hand, and rotate the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
Press the "Start/Stop" button to sew
forward.
a Reverse stitches
→ The machine will begin sewing slowly.
• Be sure the needle does not strike a basting
pin, or any other objects, during sewing. The
thread could tangle or the needle could break,
causing injury.
.
f
When sewing is completed, hold the
"Reverse/Reinforcement Stitch" button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
g
After sewing, press the "Thread Cutter"
button to trim the threads.
Memo
• When the automatic thread cutting and auto-
matic reinforcement stitch keys on the
screen are selected, reverse stitches (or
reinforcement stitches) will be sewn auto-
matically at the beginning of sewing when
the "Start/Stop" button is pressed. Press the
"Reverse/Reinforcement Stitch" button to
sew reverse stitches (or reinforcement
stitches) and trim the thread automatically at
the end of sewing.
SEWING THE STITCHES
CAUTION
3
95