Stitch Setting Chart - Brother 882-W04 Operation Manual

STITCH SETTING CHART

The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch
widths, and whether or not the twin needle mode can be used.
Note
• Quilting foot "C" is used when the straight stitch needle plate is attached to the machine. Refer to
"Using Free motion Quilting Foot "C"" on page 116.
Presser foot
Stitch Stitch name
Straight stitch
(Left)
Straight stitch
(Left)
Straight stitch
(Middle)
Straight stitch
(Middle)
Triple stretch
stitch
Stem stitch
Decorative
stitch
Basting stitch
Zigzag stitch
Zigzag stitch
Zigzag stitch
(right)
Zigzag stitch
(left)
2 steps elastic
zigzag
Applications
General sewing, gather,
pintuck, etc. Reverse stitch is
sewn while pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather,
pintuck, etc. Reinforcement
stitch is sewn while pressing
"Reverse/Reinforcement
Stitch" button.
General sewing, gather,
pintuck, etc. Reverse stitch is
sewn while pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather,
pintuck, etc. Reinforcement
stitch is sewn while pressing
"Reverse/Reinforcement
Stitch" button.
General sewing for
reinforcement and decorative
topstitching
Reinforced stitching, sewing
and decorative applications
Decorative stitching, top
stitching
Basting
For overcasting, mending.
Reverse stitch is sewn while
pressing "Reverse/
Reinforcement Stitch" button.
For overcasting, mending.
Reinforcement stitch is sewn
while pressing "Reverse/
Reinforcement Stitch" button.
Start from right needle
position, zigzag sew at left.
Start from left needle position,
zigzag sew at right.
Overcasting (medium weight
and stretch fabrics), tape and
elastic

STITCH SETTING CHART

Stitch width Stitch length
[mm (inch)] [mm (inch)]
Auto. Manual Auto.
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
1.0 1.0 - 3.0 2.5
(1/16) (1/16 - 1/8) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 20
(0) (0 - 1/4) (3/4)
3.5 0.0 - 7.0 1.4
(1/8) (0 - 1/4) (1/16)
3.5 0.0 - 7.0 1.4
(1/8) (0 - 1/4) (1/16)
3.5 2.5 - 5.0 1.4
(1/8) (3/32 - 3/16) (1/16)
3.5 2.5 - 5.0 1.4
(1/8) (3/32 - 3/16) (1/16)
5.0 1.5 - 7.0 1.0
(3/16) (1/16 - 1/4) (1/16)
Twin
needle
Manual
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
1.5 - 4.0 OK
(1/16 - 3/16) ( J )
1.0 - 4.0 OK
(1/16 - 3/16) ( J )
1.0 - 4.0 OK
(1/16 - 3/16) ( J )
5 - 30
(3/16 - 1-3/ NO
16)
0.0 - 4.0 OK
(0 - 3/16) ( J )
0.0 - 4.0 OK
(0 - 3/16) ( J )
0.3 - 4.0 OK
(1/64 - 3/16) ( J )
0.3 - 4.0 OK
(1/64 - 3/16) ( J )
0.2 - 4.0 OK
(1/64 - 1/16) ( J )
359