Saving Your Stitch Settings; Using The Image Key; Saving Settings - Brother 882-W04 Operation Manual

SELECTING UTILITY STITCHES

■ Using the Image Key

You can display an image of the selected stitch. You
can check and change the colors of the image of the
screen.
a
Press .
→ An image of the selected stitch is displayed.
b
Press to change the thread color of
the stitch on the screen.
* Press
stitch.
a Stitch screen
Memo
• The color changes every time you press
.
Note
• If stitches are wider or larger than display,
press darkened arrows to move the stitch
pattern for better visibility.
c
Press to go back to the original
screen.
92
to display an enlarged image of the

Saving Your Stitch Settings

The settings for the zigzag stitch width, stitch
length, thread tension, automatic thread cutting,
automatic reinforcement stitching, etc., are preset
in the machine for each stitch. However, if you
have specific settings that you wish to reuse later
for a stitch, you can change the settings so that
they can be saved for that stitch. Five sets of
settings can be saved for a single stitch.

■ Saving Settings

a
Select a stitch. (Example:
b
Specify your preferred settings.
a
)