Changing The Screen Saver Image - Brother 882-W04 Operation Manual

LCD SCREEN

■ Changing the Screen Saver Image

Instead of the default image, you can select your
own personal images for the screen saver of your
machine.
Before changing the screen saver image, prepare the
image on your computer or USB media.
Compatible image files
JPEG format (.jpg)
Format
Max. 150 KB for each image
File size
480 × 800 pixels or less, (If the width is
File dimension
more than 480 pixels, the image imported
will be reduced to a width of 480 pixels.)
5 or less
Number allowed
Note
• When using USB media, make sure that it
contains only your own personal images to
be selected for the screen saver.
• Folders are recognized. Open the folder that
holds your personal images.
a
Press
→ The Sewing settings screen appears.
b
Press
→ The General settings screen appears.
c
Display 4/8 (page 4 of 8) of the General
settings screen.
d
Press
e
Press
40
.
.
.
.
f
Connect the USB media or the computer
(using a USB cable) that contains your
personal image to the USB port of the
machine.
* See page 32 about USB connectivity.
g
Press to select the first image.
* The images will appear in a list in this screen. Select
the desired number to specify the image.
h
Select the device that is connected.
* Press when connecting USB media to the
primary (top) USB port.
* Press when connecting USB media to the
center USB port.
* Press when connecting a computer using a
USB cable, and then copy your personal images into
"Removable Disk", which appears on the desktop of
the computer.
→ A list of your personal images appear on the screen.