Removing The Cooktop - KitchenAid KFGS306VSS Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: The electronic control is part of the
cooktop and cannot be serviced separately.
1. Turn manual gas line shutoff valve to the
closed position.
2. Unplug cooktop or disconnect power.
3. Remove the burner grates from the cook-
top.
4. Pull the knobs off the gas valves.
5. Remove the burner caps and bezels from
the standard burner bases.
6. Remove the components from the Crown
burner.

REMOVING THE COOKTOP

Spreader
Spreader
Bezel
Gas Valve Knobs
7. Remove the three T-20 screws from the
crown burner base and the two screws
from each of the standard burner bases.
4-2
Cap
Burner Grates
Crown Burner
Screws (3 )
Standard Burner
Screws (2 each)
Cap
Bezel