KitchenAid KFGS306VSS Technical Education page 39

d) Unlatch and disconnect the main wire
connector from the spark switches and
remove the switches.
4. To remove a standard gas valve:
a) Remove the spark switch from the valve
you are accessing (see step 3).
b) Remove the six screws from the front
burner box access panel and remove
the panel.
Access Panel & 6 Screws
c) Disconnect the 1/2˝ gas outlet line fit-
ting from the gas valve.
Spark Switch
Connector
Gas Line
Fitting
4-5
d) Remove the screw from the gas mani-
fold clamp and remove the gas valve.
Gas Manifold
Clamp Screw
e) Check the rubber seal on the gas
valve stem and make sure that it is
not cracked, or torn. If so, replace the
seal.
Gas Valve
Seal