Product Dimensions; Installation Clearances; Electrical Requirements - KitchenAid KFGS306VSS Technical Education

• Provide cutout in right rear corner of cutout
enclosure as shown to provide clearance for
gas inlet, power supply cord, and to allow the
rating label to be visible.
IMPORTANT: To avoid damage, check with your
builder or cabinet supplier to make sure that the
materials used will not discolor, delaminate or
sustain other damage.

Product Dimensions

A
�⁄��
A. 30 " (76.7 cm) on 30" (76.2 cm) models,
�⁄�
36 " (92.0 cm) on 36" (91.4 cm) models
B. 21" (53.3 cm)
�⁄�
C. 3 " (8.3 cm)
A
C
K
J
M
" "
A. 30 (76.2 cm) on 30 (76.2 cm) models; 36
"
36 (91.4 cm) models
B. Combustible area above countertop (shown by dashed box above)
"
C. 30 (76.2 cm) minimum clearance between top of cooktop platform
and bottom of unprotected wood or metal cabinet (24
minimum clearance if bottom of wood or metal cabinet is protected by
"
not less than �⁄� [0.6 cm] flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015
"
0.024 [0.06 cm] aluminum or 0.020
range hood see NOTES.*
"
D. 13 (33.0 cm) recommended upper cabinet depth
"
�⁄�
E. 1 (2.8 cm)
"
F. 20 (50.8 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop
within minimum horizontal clearances to cooktop
H. Grounded outlet - Locate within 24" (61.0 cm) of right rear corner of
cutout
B
C
D
B
F G
E
H
L
I
"
(91.4 cm) on
"
[61.0 cm]
"
[0.04 cm] stainless steel, or
"
[0.05 cm] copper). If installing a
I. 29" (73.7 cm) on 30" (76.2 cm) models; 35¼" (89.5 cm) on
36" (91.4 cm) models
J. 24" (61.0 cm) minimum countertop depth is required
�⁄�
K. 2 " (7.3 cm) minimum distance to rear combustible surface
L. Gas line opening - Wall: anywhere 5" (12.7 cm) below underside of
countertop. Cabinet floor: anywhere within 6" (15.2 cm) of rear wall is
recommended
M. 8" (20.3 cm) minimum distance to nearest left side combustible
surface.**
N. 8" (20.3 cm) minimum distance to nearest right side combustible
surface.**
30" (76.2 cm) Cooktop Overall: M + N must equal 48" (122.0 cm)
minimum + 29" (73.7 cm) cutout for cooktop or 77" (195.6 cm)
36" (91.4 cm) Cooktop Overall: M + N must equal 48" (122.0 cm)
minimum + 35¼" (89.5 cm) cutout for cooktop or 83¼" (211.5 cm)
**M + N combined must be at least 48" (122.0 cm) minimum overall
Example 1: M = 8" (20.3 cm) left side + N = 40" (101.6 cm) right side
= 48" (122.0 cm)
Example 2: M = 24" (61.0 cm) left side + N = 24" (61.0 cm) right side
= 48" (122.0 cm)

Installation Clearances

NOTES:
After making the countertop cutout, some
installations may require notching down
the base cabinet side walls to clear the
cooktop base. To avoid this modification,
use a base cabinet with sidewalls wider
than the cutout.
If cabinet has a drawer, a 4" (10.2 cm) depth
clearance from the countertop to the top
of the drawer (or other obstruction) in base
cabinet is required. The drawer depth may
need to be shortened to avoid interfering
with the regulator.
* If installing a hood above the range, follow the
hood instructions for dimensional clear-
ances above the cooktop surface.
N

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
2-2
WARNING