Removing A Spark Ignitor From Standard Or Crown Burner - KitchenAid KFGS306VSS Technical Education

REMOVING A SPARK IGNITOR FROM
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug cooktop or disconnect power.
2. Remove the cooktop (see page 4-2 for the
procedure).
Crown Burner
Standard Burners
3. To remove spark ignitor from standard
burner.
a) Disconnect spark ignitor wire from spark
module.
Spark Module
Igniter Wires
STANDARD OR CROWN BURNER
b) Remove igniter retainer clip from stan-
dard burner.
c) Remove igniter from standard burner.
Continued on the next page.
4-9
Igniter
Igniter
Retainer
Clip
Igniter
Retainer
Clip