REMOVING THE COOKTOP GLASS
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
Failure to do so can result in death or
Disconnect power to the cooktop.
Remove the cooktop from its mounting
Remove the 12 screws (3 on each side)
from the front, rear, and side flanges of the
Cooktop Glass Screws
(6 of 12)
Lift the cooktop glass off the burner base.
NOTE: When you reinstall the cooktop glass
on the burner base, make sure that you insert
the two alignment pins on the bottom of the
glass into the holes of the user interface board
assembly for proper alignment.
2 Alignment Pins
On Cooktop Glass
Lift Off Cooktop Glass
2 Holes In User
Interface Board Assembly