REMOVING THE COOKTOP GLASS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug cooktop or disconnect power.
2.
Remove the cooktop from its mounting
location, (see "Installation Instructions" in
Section 2). Position the cooktop so that
you can access the bracket screws below
the cooktop glass.
3.
Remove the fourteen flat-head screws
from the front, rear, and side ceramic glass
brackets.
4.
Remove the two small side brackets from
the cooktop base.
4-2