To Reload User Data From A Sequencer - Rocktron VOODU Valve User Manual

Tube driven programmable 24-bit dsp guitar preamp
Table of Contents

Advertisement

To reload user data from a sequencer:

Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
Step 1
MIDI IN on the receiving Voodu Valve™.
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Voodu
Valve™ back to the MIDI IN of the transmitting sequencer.
Step 2
Turn the FUNCTION SELECT controls on both the receiving Voodu Valve™ until "MIDI
DUMP/LOAD" is displayed.
Turn the PARAMETER SELECT controls on the receiving Voodu Valve™ until "BULK
Step 3
DUMP/LOAD" is displayed.
RECEIVING VOODU VALVE
RECEIVING VOODU VALVE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents