3,6,9,12
4,7,10,13
2,5,8,11
1
To access the Controller Assign function, turn the FUNCTION SELECT control clockwise to
Step 1
"CONTROLLER ASSIGN".
Turn the PARAMETER SELECT control for the first parameter of the Controller Assign
Step 2
function. This parameter allows you to select a controller number for the NUMB 1 parameter
to respond to.
This parameter (NUMB 1 only) also gives you the option of selecting "ADJ". When "ADJ" is
selected, the parameter assigned to the first controller (PARA 1) can be instantly accessed by
turning the PARAMETER ADJUST control when the preset title is displayed. This allows you
to access a parameter that you adjust frequently without paging through function headings
and parameters.