To Dump The Unit's Memory Into A Sequencer - Rocktron CHAMELEON User Manual

To dump the Chameleon memory into a sequencer:
Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving
Step 2
Step 3
Step 4
86
Connect a standard MIDI cable from the MIDI OUT of the transmitting Chameleon to the MIDI IN on
the receiving sequencer.
Chameleon back to the MIDI IN of the transmitting Chameleon.
Turn the FUNCTION SELECT controls on the transmitting Chameleon until "MIDI DUMP/LOAD" is
displayed.
Turn the PARAMETER SELECT control on the transmitting Chameleon until "BULK DUMP/LOAD"
is displayed.
Start the sequencer recording.