Restoring Controller Assignments - Rocktron VOODU Valve User Manual

Step 4
Press the STORE button at this time to initiate the All Restore procedure and erase all current
Voodu Valve™ presets, replacing them with the original factory presets. The Voodu Valve™
will display "INITIALIZING" as the Voodu Valve™ memory is restored.
After the All Restore process is completed, the display should read "ERRORS 0". This is the
number of bytes that the Voodu Valve™ found that did not initialize properly. Any number of
errors other than "0" means that the Voodu Valve™ may not have initialized properly and the
process should be repeated.
The Voodu Valve™ will remain in this condition until the FUNCTION SELECT control
is turned to exit the Factory Restore function. The preset currently recalled will be the preset
most recently restored into the current location.
Restoring the Voodu Valve™ controller assignments: