Quick Setup; Selecting A Preset; Changing Preset Parameters; Storing Changed Parameters - Rocktron VOODU Valve User Manual

SELECTING A PRESET

STEP 1 Turn the PRESET control to the desired preset.
STEP 2 Press the RECALL button to call up the selected
preset.

CHANGING PRESET PARAMETERS

STEP 3 Turn the FUNCTION SELECT control to the
desired effect or utility function.
STEP 4 Turn the PARAMETER SELECT control to the
parameter you wish to alter under the selected effect
or utility function.
STEP 5 Use the PARAMETER ADJUST control to select
the new parameter value.
STEP 6 The COMPARE button may be used to compare the
sound of the altered value to the stored value.

STORING CHANGED PARAMETERS

STEP 7 Press the STORE button to start the storing
procedure.
STEP 8 If you wish to save the altered preset in the
current preset location, press the STORE button a
second time.
If you wish to store the altered preset in a different
preset location, turn the PRESET control to the
desired preset number, then press STORE a second
time.
STEP 9 When storing into a different preset location, the
Voodu Valve™ will display "COPY TITLE
TOO?". If you wish to copy the title from the
previous preset, press STORE a third time. If you
do not wish to copy the title, turn any knob to exit
the storing procedure.