To Reload User Data From A Sequencer - Rocktron Blue Thunder User Manual

To reload user data from a sequencer

Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
Step 1
MIDI IN on the receiving Blue Thunder.
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Blue Thunder
back to the MIDI IN of the transmitting sequencer.
Step 2
Press the EDIT button to enter the "EDIT MODE"
Turn the FUNCTION SELECT controls on both the receiving Blue Thunder until "MIDI
Step 3
DUMP/LOAD" is displayed.
Step 4 Turn the PARAMETER SELECT controls on the receiving Blue Thunder until "BULK
DUMP/LOAD" is displayed.
EDIT MODE
MIDI DUMP/LOAD
RECEIVING BLUE THUNDER
MIDI DUMP/LOAD
RECEIVING BLUE THUNDER
Operating the Blue Thunder
50