Continuous Controller Mode - Rocktron PIRANHA User Manual

D. Continuous Controller Mode
When set to operate in Continuous Controller mode, the Piranha's front panel controls can be used to control other
MIDI products in real time. To use the Continuous Controller mode, set the parameter(s) on the receiving unit(s) to
respond to the controller number for the given Piranha front panel knob (shown below). For example, if the Reverb Level
parameter on a Rocktron Intellifex was set to respond to controller 18, the front panel BASS control on the Piranha could
be used to adjust that Intellifex parameter.
Note: Continuous Controller mode can also be accessed by sending the Piranha
The front panel knobs transmit the following controller numbers and value ranges:
Note: Program changes can not occur when operating in Continuous Controller
* * * * To cancel the Continuous Controller mode, press the GLOBAL button twice. * * * *
18
controller number 50.
mode.