Restoring The Blue Thunder Controller Assignments - Rocktron Blue Thunder User Manual

Operating the Blue Thunder
Step 5
Press the STORE button at this time to initiate the All Restore procedure and erase all current
Blue Thunder presets, replacing them with the original factory presets. The Blue Thunder will
display "INITIALIZING" as the Blue Thunder memory is restored.
After the All Restore process is completed, the display should read "ERRORS 0". This is the
number of bytes that the Blue Thunder found that did not initialize properly. Any number of
errors other than "0" means that the Blue Thunder may not have initialized properly and the
process should be repeated.
control is turned to exit the Factory Restore function. The preset currently recalled
will be the preset most recently restored into the current location.

Restoring the Blue Thunder controller assignments:

out affecting presets and other stored information.
Step 3 on the preceding page (instead of the "243" shown).
55
The Blue Thunder will remain in this condition until the FUNCTION SELECT
The controller assignments for the Blue Thunder can also be reinitialized with-
To reinitialize only the controller assignments, enter a code number of "244" at
INITIALIZING
ERRORS 0