Onnecting To A B Roadband N Etwork - Dish Network ViP222 User Manual

Phone System Setup
You must set up the receiver for your telephone system (touch tone or rotary), and set a
telephone number prefix, if you need to dial a prefix first to make an outside call.
Note: A prefix is different than an area code.
1
Press MENU, then select System Setup, Installation, and then Phone System.
2
Select the Touch Tone or the Rotary Phone option in the Phone Type list.
3
Select either the No Prefix or the Prefix Code option in the Outside Line Prefix list.
Note: Usually, you need a telephone number prefix only for business installations. For
most residential installations, all you need to do is set the telephone system type. The
default setting of No Prefix will allow correct dialing. If this is the case, select the Save
option to save the above setting, and stop here. If you do need to set a prefix, then instead
of selecting the Save option, go on to step 5.
4
If you selected No Prefix, select Done.
5
If you selected Prefix Code, the receiver highlights the box where you must enter the
exact sequence used when dialing an outside line.
6
Select Done.
C
ONNECTING TO A
If you have broadband (high-speed) Internet access at home, you can connect your
receiver to your home network. You can use this connection to order Pay-Per-View movies
using your remote control if you are not able to connect a telephone line. It also provides
access to additional content not otherwise available through your satellite TV package.
Visit the www.mydish.com/getconnected website to find a guide containing detailed
installation instructions on making this type of connection to your DISH receiver.
Connecting to a Broadband Network
B N
ROADBAND ETWORK
Connections and Setup
95