IBM 10/100 EtherJet User Manual page 24

Advanced information
14
Enable (default): The system boots from a local diskette drive or hard drive.
Disable: The system cannot boot from a local drive, regardless of the setting for
Default Boot.
Prompt Time
The selection are 2 (default), 3, 5, and 8. Choose a number to specify how many
seconds the message, "Initialization Intel Boot Agent Version 2.6—Press Ctrl+S to
enter the Setup Program," will be displayed when the system is booted.
Setup Message
Enable (default): The message, "Initializing Intel Boot Agent Version 2.6–Press
Ctrl+S to enter the Setup program," will be displayed when the system is booted in
Diagnostic POST mode.
Disable: Only the message, "Initializing Intel Boot Agent Version 2.6" will appear.
However, you can still enter the setup program by entering Ctrl+S.
Power Management
ACPI (default):
APM: Changing from the default setting to APM increases the power consumption
of the computer in standby state.