Download Print this page

European Community -Ce Mark - IBM 10/100 EtherJet User Manual

Mini-pci adapter with 56k modem
Hide thumbs

Advertisement

Table of Contents
Attention: Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed 5.
REN: 0.5 (A)
European Community –CE Mark
Declaration of Conformity
Xircom, Inc. declares that the equipment described in this document is in conformance with the requirements of the
European Council Directive listed below:
73/23/EEC
Low Voltage Directive with Amendment
93/68/EEC
89/336/EEC
EMC Directive with Amendments
92/31/EEC and 93/68/EEC
98/13/EC
Telecommunications Terminal Equipment and
Satellite Earth Station Equipment with Council
Decision 98/482/EC for pan-European single
terminal connection to the public switched network (PSTN).
This declaration is based upon compliance of the product to the following standards:
EN 60950 (1992 w/ A1, 2, 3, 4, &11) Product Safety
EN 55022 (C.I.S.P.R. 22 Class B) RF Emissions Control
EN 50082-1 (IEC 801-2, 3, & 4) Immunity to Electromagnetic Disturbances
CTR21 (TBR21)
pan-European PSTN
Xircom, Inc. also declares its awareness of the Advisory Notes contained in E.T.S.I. Guides EG 201 120 & EG
201 121, including any amendments thereto.
Product Description: Mini PCI Modem 56 +10/100 Ethernet
Model:
MPCI3A56G-100
Responsible party:
R.W. Bass,
Vice President, Operations Xircom, Inc.
2300 Corporate Center Drive
Thousand Oaks, California 91320 U.S.A.
The CE Mark approval is indicated on your Xircom modem by the CE Mark logo on the back of the card.
Country-specific approval numbers are no longer required. The CE Mark logo indicates that the Xircom product
has been tested and found to be compliant with the appropriate regulations as listed in the Declaration of
Conformity above, and therefore can be used in any of the countries of the EU.
Note: These regulations do not affect GlobalACCESS features of the Xircom modem, including use on networks
of countries outside the European Union.
Appendix C. Regulatory Agency Notices
43

Advertisement

Table of Contents
loading

  Related Manuals for IBM 10/100 EtherJet