Modem Messages - IBM 10/100 EtherJet User Manual

Register Function
S48 LAPM Error Control and Feature Negotiation
S89 Timer to Control Sleep Mode
S90 Read-only Local Phone
S91 Line Transmit Level
S108 Network Codec Type

Modem Messages

Result Code
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT 1200EC
NO DIALTONE
BUSY
NO ANSWER
CONNECT 2400 EC
CONNECT 4800 EC
CONNECT 9600 EC
CONNECT 14400 EC
CONNECT 19200 EC
Numeric Description
0 Command executed
1 Modem connected to line
2 A ring signal has been detected
3 Modem lost carrier signal, or does not detect carrier signal,
or does not detect answer tone
4 Invalid command
5 Connection at 1200 bit/s
6 No dial tone detected
7 Busy signal detected
8 Remote end never answered
10 Connection at 2400 bit/s
11 Connection at 4800 bit/s
12 Connection at 9600 bit/s
13 Connection at 14400 bit/s
14 Connection at 19200 bit/s
Advanced information
Register/Units
7=Enabled
128=Disabled
S48=7
S48=128
S36=0, 2: LAPM or hangup;
do not use
S36=1, 3: LAPM or async
S36=4, 6: LAPM, MNP,
hangup MNP, or hangup
S36=5, 7: LAPM, MN,P
async MNP, or async
0, 5-65 seconds
0=on-hook
1=off-hook
6-15 dB
22=µ-Law
33=A-Law
7=V.8 information. Or
choose on the basis of its
country ID.
Using the modem
25