Appendix D. User Notices
This card is intended for use with UL1950/EN60950/IEC60950 (or other NTRL) listed ITE computers that
contain a Mini PCI type 3A connector.
Care should be taken to avoid damaging the insulation tape on the Xircom Mini PCI Modem 56 + 10/100
Ethernet card. Do not cut, tear, pierce, or remove the insulation tape.
(English) ATTENTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line
(Francais) ATTENTION: Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de
telecommunications 26 AWG ou de section supérieure.
The MPCI3A56G-100 is designed only for connection to the analogue public switched telephone network (PSTN).
Please connect the cable from the MPCI3A56G-100 with the wired plug connector code F with the wire down in
the wall socket (TAE 6) code F. The MPCI3A56G-100 can be used as a single device.
Copyright IBM Corp. 2000