Pro:centric Setup; Pro:centric Operation - LG 55WV70 Setup Manual

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be
specified on the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/
administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the
Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric Admin Client.
The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual
options for configuring both the Data Channel and the Pro:Centric Application Mode.
The EZ-Manager Wizard also provides a USB Configuration option that enables you to configure a
TV for FTG Mode using an FTG Configuration (.tlx) file stored on a USB memory device. The FTG
Configuration file incorporates FTG Installer Menu settings, which includes Installer Menu items 098
PRO:CENTRIC and 119 DATA CHANNEL.
Refer to "EZ-Manager Wizard" on pages 10 to 16 for further information on the EZ-Manager Wizard
options.
• If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL
to the appropriate values. Refer to "Installer Menu" information on pages 19 to 27 for further details. Also,
as necessary, refer to "Custom Master TV Setup" information on pages 28 to 31 and/or cloning information
on pages 33 to 41.
Note: When the TV is in either Pass-through or FTG Mode, you can also leave Installer Menu item 119
DATA CHANNEL set to its default value (255) to enable the TV's Data Channel Auto Search feature to set
the DATA CHANNEL value. See item 119 description on page 27 for additional information.
• If the TV is in FTG Mode, use the FTG File Manager to update the Pro:Centric and Data Channel Installer
Menu items. Then, transfer the FTG Installer Menu settings to the TV. Refer to FTG Mode information on
pages 42 to 48 for further details. Also, see note above regarding the option to use the TV's Data Channel
Auto Search feature to set the DATA CHANNEL value.
206-4231
Pro:Centric Operation (Cont.)
9