Custom Master Tv Setup Procedure - LG 55WV70 Setup Manual

Custom Master TV Setup Procedure

1. Turn ON the TV.
If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow
keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the
confirmation pop-up window, select OK, and then press OK once more on the Installer
Remote to exit the wizard.
2. Set Installer Menu items.
This step provides specific instruction only on the Installer Menu items
that should be set on a Master TV. Refer to pages 19 to 27 for detailed
information on all Installer Menu items.
a) Use the Installer Remote to access the PTC Installer Menu (see
"Accessing the Installer Menu" on page 19 for further information).
The next step depends on whether the EZ-Manager Wizard
appeared when you turned ON the TV:
• If the wizard did appear, the TV is in a factory default state, and
you can proceed to set Installer Menu items. Go to step (c).
• If the wizard did not appear, go to step (b).
b) Set Installer Menu item 117 FACT DEFAULT to 1 and press OK
on the Installer Remote.
This clears all Installer Menu custom settings, channel lineup, etc.
and restores the factory default settings. The value will change
back to 0 after the PTC has been restored to factory default
condition. This step ensures that the TV Channel Memory will be
the active channel lineup.
c) Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0.
• CATV: Set to 1 (default).
d) Set any other Installer Menu items that affect your TV programming
network to the required configuration. For example, enable/disable
Aux inputs, set a Start Channel, etc.
e) After you have adjusted all Installer Menu item settings as required,
press OK once on the Installer Remote to save your changes; then,
press OK again to exit the menu.
Note: If you performed step (b) above to restore factory defaults,
the EZ-Manager Wizard will re-activate as soon as you exit the
Installer Menu. Exit the wizard (see step 1), and then continue
with step 3.
3. Set up TV features.
On-screen setup menus control the features of the TV. Press MENU
SETTINGS on the Installer Remote to access the TV setup menus,
and then set Channel, Picture, Audio, Lock, Time, etc. options to the
desired configurations. See "Clonable TV Setup Menu Features" list on
previous page and also notes on the following page.
206-4231
• HRC: Set to 2.
• IRC: Set to 3.
Custom Master TV Setup (Cont.)
xxLP62xH PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.018
Note: The Installer Menu header will vary
depending on the TV you are setting up.
117
003
Installer Menu items, as required.
PICTURE
LOCK
Use the TV setup menus to set the TV
features to the desired configuration
CPU-CTV
000
ASIC D279
CPU V3.18.00
Typical Installer Menu
FACT DEFAULT 000
BAND/AFC 001
Adjust the values for these
AUDIO CHANNEL
OPTION INPUT MY MEDIA
for the end user.
(Continued on next page)
TIME
29