Teaching Ftg Configuration To A Tv - LG 55WV70 Setup Manual

Lodging guest interactive pro:centric tvs commercial mode setup guide
Hide thumbs Also See for 55WV70:
Table of Contents

Advertisement

FTG Mode of Operation (Cont.)

Teaching FTG Configuration to a TV

This section describes how to "Teach" an FTG Configuration file from a USB memory device to a TV,
using the USB Download Menu. Ensure you have completed the procedure on the previous page to
create the FTG Configuration file before proceeding with the steps below.
Note: If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can complete
the Teaching process via the wizard (see "USB Configuration" on page 16).
Note: You may also use the LG Smart Install utility to complete this process. See "LG Smart Install
Utility" on pages 17 to 18 for further information.
1. Turn ON the TV, and then insert the USB memory device that contains
the FTG Configuration file into the Target LP62xH TV USB IN port.
2. Press MENU SETTINGS on the Installer Remote to display the TV
setup menus (TV is in Pass-through Mode) or the Function Menu (TV
is already in FTG Mode).
3. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from the
Function Menu. Then, press the number "7" key a total of seven times
to display the USB Download Menu.
4. Use the Up/Down arrow keys to select Teach To TV (TLX), and then
press OK.
5. Use the Up/Down arrow keys to select the FTG Configuration file you
want to install, and then press OK.
Teaching status will be shown on a progress bar in a new window.
Do NOT remove the USB device until Teaching is complete. When the
Teaching process is complete, the TV will briefly display a "Teaching
Completed" window and then exit the USB Download Menu.
6. Remove the USB memory device from the Target TV, and verify that
the FTG Configuration is resident on the Target TV.
The Target TV CPU is now in FTG Mode (if it was previously in Pass-
through Mode).
Note: After the Teaching process is complete, the TV tunes according to
the Start Channel setting in the Installer Menu. If a Start Channel is speci-
fied, the TV will tune to that channel; otherwise, the TV will tune to the
lowest logical channel in the FTG Channel Map.
46
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Previous
Teach To TV (TLX)
xxLP62xH-UA00005.TLX
Previous
Teach To TV
UPDATING...
Do not unplug!
OK
OK
50%
206-4231

Advertisement

Table of Contents
loading

This manual is also suitable for:

32lp62xh39lp62xh42lp62xh

Table of Contents