External Equipment Connections; Vcr Setup - LG 71PY1M Owner's Manual

External Equipment Connections

External Equipment Connections
NOTE: Not all cables shown are included with the plasma display.

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.
- Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen after the image is
changed or when the unit is off.
How to connect
1. Connect the audio and video cables from the VCR's output
jacks to the monitor input jacks, as shown in the figure.
When connecting the monitor to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
2. If you connect an S-VIDEO output from VCR to the S-
VIDEO input, the picture quality is improved; compared to
connecting a regular VCR to the Video input.
3. If you connect the Euro scart socket of the VCR to the Euro
scart socket of the set. No other connection is needed.
Mono VCR: Connect the video output cable from the VCR
to the VIDEO input on the monitor.
S-VIDEO VCR: Connect the S-Video output cable from the
VCR to the S-VIDEO input on the monitor. (Note that S-
Video offers higher quality).
How to use
1. Insert a video tape into the VCR and press PLAY on the
VCR.
(Refer to the VCR owner's manual.)
2. Use the INPUT button on the remote control to select
Video 1.
(If connected to VIDEO 2, VIDEO 3 or VIDEO 4, select the
Video 2, Video 3 or Video 4 input source.)
Get user manuals: See SafeManuals.com
( )
MONO AUDIO
VIDEO
VIDEO AUDIO S-VIDEO
COMPONENT IN
VIDEO IN VIDEO IN
VIDEO IN 3 VIDEO IN 4
or
ANT OUT
S-VIDEO
ANT IN OUT
VIDEO (R) AUDIO (L)
OUTPUT
SWITCH
3 4
IN
VCR
Installation
Owner's Manual 13