Ez-Manager Wizard; Before You Begin - LG 55WV70 Setup Manual

EZ-Manager Wizard

The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual)
of configuring the essential Installer Menu items for Pro:Centric TV operation. The wizard will appear on the
screen each time the TV is turned ON, until one of its configuration methods has been completed or the
wizard is exited. Use the Installer Remote to make selections and complete each wizard step.
Caution: Do NOT unplug the TV power cord or remove the antenna cable during the
configuration process, as doing so will interrupt the current step and may corrupt the
configuration data.

Before You Begin

• While the EZ-Manager Wizard is intended primarily for Pro:Centric-related configuration, the wizard also
offers Zoning as well as USB configuration options. However, if you plan to create a Master TV Setup
using the procedure described on pages 28 to 31, be sure to exit the EZ-Manager Wizard in order to
avoid setting modes that may restrict the custom setup procedure. See also "Initiate Configuration or
Exit the EZ-Manager Wizard" on the following page.
• If it has been completed or exited and therefore does not display, the EZ-Manager Wizard can be
reactivated; however, this requires that factory defaults be restored on the TV(s). Refer to Reference
section, "Restoring Factory Defaults on the TV(s)," for further information.
• Each wizard step is allotted a time frame after which the wizard proceeds without user interaction. If the
Pro:Centric server is configured on the system and if there are no specification requirements, for example,
for the TV's Zone, Label, and/or Room Number settings, you can simply turn ON the TV, and once
initiated, the wizard will proceed through each of the configuration steps with no further user interaction.
• If any of the configuration steps fails, you will see a "Diagnostics" screen with an indication of the failure.
You will then have the opportunity to reinitiate the configuration process from the previous screen or exit
the EZ-Manager Wizard.
• The EZ-Manager Wizard enables you to redirect to the TV's standard USB Download Menu to perform
USB configuration functions, including FTG Mode via CPU configuration, cloning, and software upgrades.
Each of these functions requires that you have the appropriate file(s) loaded on a USB memory device.
USB configuration via the EZ-Manager Wizard/USB Download Menu is described in further detail in the
pages that follow.
• You can connect a USB memory device to the TV at any time while the wizard is in progress (either at the
Welcome level or beyond) to use the LG Smart Install utility to perform USB configuration functions. Any
file(s) you wish to use for configuration purposes must be stored in a folder named "LGSMARTINSTALL"
in the root directory of the USB memory device. See "LG Smart Install Utility" on pages 17 to 18 for
further information.
10
206-4231