Learning / Teaching A Master Tv Setup Using A Usb Memory Device / .Tll File - LG 55WV70 Setup Manual

USB Cloning Procedures (Cont.)

Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File

USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 33 before beginning any cloning
procedures.
• You may edit a filename as part of the Learning procedure; however, a file with edited contents
will not be recognized.
• It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target
TV's clock manually, or use the Auto Clock setting in the TV setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Insert the USB memory device into the USB IN port on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV setup
menus. Use the arrow navigation keys to select/highlight the Option menu
icon, and then press the number "7" key a total of seven times to display the
USB Download Menu.
4. To gain access to the "Learn From TV" option in the USB Download Menu, key
in the password used to access the Installer Menu (Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLL), and then
press OK.
6. To differentiate this .tll file from others, you can use the Up/Down arrow keys
to change the last five digits of the filename. Press OK when you are ready
to initiate Learning.
Learning status will be shown on a progress bar in a new window. When the
Learning process is complete, the USB Download Menu will reappear on the
screen.
7. When Learning is done, press
Download Menu, and remove the USB memory device from the Master TV.
Teach Master TV Setup to Target TV
1. Turn ON the Target TV.
The next step depends on whether the EZ-Manager Wizard appears on the
screen:
• If the wizard is displayed, the TV is in the required factory default state. If
desired, you can complete the Teaching process via the EZ-Manager Wizard
(see "USB Configuration" on page 16) or using the LG Smart Install utility (see
"LG Smart Install Utility" on pages 17 to 18). To continue with this procedure,
exit the wizard: Use the arrow keys on the Installer Remote to select Exit from
the Welcome screen and press OK. In the confirmation pop-up window, select
OK, and then press OK once more on the Installer Remote.
Then, go to step 3.
36
on the Installer Remote to exit the USB
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous
Learn From TV (TLL)
Select the file name and press OK to start
xxLP62xH-UA00001.TLL
Previous
Learn From TV
UPDATING...
Do not remove the USB from the port!
Do not unplug!
(Continued on next page)
OK
OK
25%
206-4231