Installer Menu; Accessing The Installer Menu - LG 55WV70 Setup Manual

Use the Installer Menu to set up, change, or view operational settings. This section describes
how to access, use, and exit the Installer Menu from the TV itself; however, you should also refer
to the Installer Menu descriptions in this document if you are configuring the TV using LG's FTG
configuration software.
Refer to the table on pages 21 and 22 for brief descriptions of Installer Menu items. More detailed
descriptions follow the table listing.

Accessing the Installer Menu

1. Turn ON the TV.
If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow
keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the
confirmation pop-up window, select OK, and then press OK once more on the Installer Remote
to exit the wizard.
2. Using an Installer Remote, press MENU SETTINGS repeatedly until the on-screen display of
the TV setup menus (if the TV is in Pass-through Mode) or the Function Menu (if the TV is not
in Pass-through Mode) no longer toggles, and then press the Installer Menu entry sequence
(e.g., 9-8-7-6) + OK to access the Installer Menu.
Note: The default Installer Menu entry sequence is "9876"; however, if Installer Menu item 000
INSTALLER SEQUENCE has been modified, the entry sequence may be one of three additional
options. See Installer Menu detailed descriptions for further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
xxLP62xH PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.018
Typical Installer Menu
Note: If the password (entry sequence) is not entered or registered correctly, you will see the
message "ENTER PASSWORD 0000" at the top of the screen instead of the Installer Menu
header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will
display.
Note: If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only. Also,
the Zone # will be indicated in the Installer Menu header under the configuration mode indicator
described on the following page.
206-4231
CPU-CTV
000
ASIC D279
CPU V3.18.00

Installer Menu

19