Lp62Xh Rear And Side Jack Panels - LG 55WV70 Setup Manual

Reference: LP62xH Rear and Side Jack Panels
Restricted to software updates.
Initiates a hardware reset and
SPEAKER OUT
LINE OUT
Connect external audio (fixed
speaker, variable speaker, or
fixed line level [amplifier])
equipment. See Reference
section, "Stereo Speaker
Setup," for further information.
When the TV is in Pass-through Mode,
the MPI function enables an external MPI
control device (i.e., clone programmer,
VOD/PPV STB, etc.) to control the TV.
Connection for Remote Jack
Pack (RJP) Control cable.
PTC SERVICE (SERVICE ONLY)
Restricted to PTC service updates.
64
Connection for HDMI/DVI
output from external device.
UPDATE
RESET
turns the TV OFF.
RESET UPDATE
MPI
RJP
MPI
RJP
OPTICAL AUDIO OUT
HDMI/DVI IN
Use for amps and home theater systems.
Note: When the TV is OFF, this port is not
enabled.
/DVI IN
.......... ..........
1 2
SPEAKER OUT OPTICAL
LINE OUT AUDIO OUT
PTC SERVICE
(SERVICE ONLY)
RGB IN (PC)
RS-232C IN
(SERVICE ONLY)
RGB IN (PC)
Connection for RGB output from PC.
RS-232C (SERVICE ONLY)
Typically used for downloading
software updates, etc.
Side Jack Panel
AUDIO/VIDEO IN
Connection for composite audio/
video output from external device.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
ANTENNA/
CABLE IN
AV IN
AUDIO IN (RGB/DVI)
USB IN
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
HDMI
Connection for HDMI output
from external device.
206-4231