1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. 55WV70
  6. Setup manual

LG 55WV70 Setup Manual

Lodging guest interactive pro:centric tvs commercial mode setup guide
Hide thumbs Also See for 55WV70:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2013 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
32LP62xH
39LP62xH
42LP62xH
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 10 – 16
Custom Master TV Setup
pages 28 – 31
FTG Mode of Operation
pages 42 – 48
P/N: 206-4231 (Rev A)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG 55WV70

Summary of Contents for LG 55WV70

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 10 – 16 Custom Master TV Setup pages 28 – 31 FTG Mode of Operation pages 42 – 48 P/N: 206-4231 (Rev A) © Copyright 2013 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 17. Power Cord Caution: It is recommended that appliances be placed Keep these instructions. upon a dedicated circuit; that is, a single outlet circuit Heed all warnings. which powers only that appliance and has no additional outlets or branch circuits.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Do not touch the ventilation openings, as they may become (Continued from previous page) hot while the TV is operating. 22. Outdoor Antenna Grounding 27. If you smell smoke or other odors coming from the TV or If an outside antenna or cable system is connected to the hear strange sounds, unplug the power cord, and contact an product, follow the precautions below.

  • Page 5: Table Of Contents

    Device......... 55 LG Smart Install Utility......17 – 18 Power Consumption Settings .

  • Page 6: Commercial Mode Overview

    ® This document describes how to set up LP62xH Pro:Centric TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU or Protocol Translator Card (PTC) or it resides externally from the TV (i.e., in a device from the solution provider).

  • Page 7: Ftg Mode

    When the TV CPU is configured with an FTG Channel Map, the CPU controls the operation of the TV. Configuration of the CPU requires the LG FTG File Manager PC application. The FTG File Manager provides utilities that enable you to create/edit an FTG Channel Map and configure Installer Menu settings.

  • Page 8: Pro:centric Operation

    The Pro:Centric server Admin Client web editor/content wizard is provided for customer configuration of portal messages and billboards/maps. Note: Customized content is typically defined by the service integrator and/or hotel administrators. LG does not provide hotel-specific content. Pro:Centric Interactive Menu Navigation Use the Pro:Centric TV remote control to operate both interactive menus and regular TV features.

  • Page 9: Pro:centric Setup

    Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be specified on the TVs. On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/ administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the Pro:Centric application.

  • Page 10: Ez-Manager Wizard

    Welcome level or beyond) to use the LG Smart Install utility to perform USB configuration functions. Any file(s) you wish to use for configuration purposes must be stored in a folder named “LGSMARTINSTALL” in the root directory of the USB memory device. See “LG Smart Install Utility” on pages 17 to 18 for further information.

  • Page 11: Initiate Configuration Or Exit The Ez-Manager Wizard

    “Exit” option from the subsequent screen(s). Note: As indicated on the previous page, you may use the LG Smart Install feature to configure the TV using a USB memory device at any time while the EZ-Manager Wizard is in progress.

  • Page 12: Tv Configuration Options

    OK in the confirmation pop-up window. Note: If you have already inserted a USB memory device with the intent to use the LG Smart Install utility and the Integrated USB Downloading screen is on display, you may still set the Zoning feature on this TV by selecting Previous to return to the EZ-Manager/TV Configuration Options screen.

  • Page 13: Assign A Zone, Label, And/Or Room Number For This Tv

    Menu to complete the configuration, continue to “USB Configuration” on page 16. • If you wish to use a USB memory device in conjunction with the LG Smart Install utility to complete the configuration, see “LG Smart Install” on pages 17 to 18.

  • Page 14: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “Next” from the TV Configuration Options screen, EZ-Manager Wizard the Searching for Pro:Centric Server screen is displayed (see example at right), and you have the following options: Searching for Pro:Centric Server... •...
  • Page 15 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, EZ-Manager Wizard use the arrow keys on the Installer Remote to select/highlight Pro:Centric Manual Configuration the Manual Pro:Centric option at the bottom right of the <...

  • Page 16: Usb Configuration

    EZ-Manager Wizard (Cont.) USB Configuration Before you being, note the following: • If you wish to perform a software upgrade from the USB Download Menu, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device.

  • Page 17: Lg Smart Install Utility

    LG Smart Install Utility LG Smart Install is a new utility that enables you to configure the TV or update multiple TV configuration elements at one time using files loaded on a USB memory device. You may use LG Smart Install to download an FTG Configuration (.tlx) file, a TV or PTC software update, and/or a splash screen image to a TV.

  • Page 18: Lg Smart Install Utility

    Note: Use the arrow keys on the Installer Remote to select Downloading Data... Warning - Do not remove the USB device during this process Previous and press OK, as necessary, to exit the LG Smart Install utility. If you accessed the utility via the EZ-Manager Maintenance File...

  • Page 19: Installer Menu

    Use the Installer Menu to set up, change, or view operational settings. This section describes how to access, use, and exit the Installer Menu from the TV itself; however, you should also refer to the Installer Menu descriptions in this document if you are configuring the TV using LG’s FTG configuration software.

  • Page 20: Using The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indi- cate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Map in CPU CPU-FTG...
  • Page 21 Installer Menu (Cont.) Installer Menu Items 000 through 075 Menu Function Value Range Default Value Brief Description of Function Item INSTALLER SEQ 0 ~ 3 Leave default set to 0. POWER MANAGE 0 ~ 7 Sets number of hours of no activity before automatic shutoff. AC ON 0 / 1 Set to 1 to enable Auto Turn ON when AC power is applied.
  • Page 22 Installer Menu (Cont.) Installer Menu Items 078 through 122 Menu Function Value Range Default Value Brief Description of Function Item UPN MSB 0 ~ 255 User programmable number, most significant byte. UPN MSB-1 0 ~ 255 User programmable number, most significant byte - 1. UPN MSB-2 0 ~ 255 User programmable number, most significant byte - 2.
  • Page 23 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items Generally, this feature is used in connection with item 004 STRT 000 - INSTALLER SEQUENCE CHANNEL where the Start Channel may, for example, be set to Specifies entry sequence to the Installer Menu. 3 or 4.
  • Page 24 Installer Menu (Cont.) 011 - KEY DEFEAT (Keyboard Defeat) 029 - OLD OCV (On Command Video™) If set to 1, KEY DEFEAT prevents the end user from accessing the Set to 1 for operation with systems from On Command Corporation. on-screen menu(s) from the display panel—MENU SETTINGS, OK, and menu navigation keys do not function.
  • Page 25 Installer Menu (Cont.) 046 - STRT AUX SRCE (Start Aux Source) 078 - UPN MSB (UPN Most Significant Byte) Sets the starting Aux source. When turned ON, the TV will tune to User programmable number, most significant byte readable by starting Aux source if item 004 STRT CHANNEL is set to 0.
  • Page 26 Installer Menu (Cont.) 092 - HDMI3 ENABLE 097 - AUDIO OUTPUT Set to 1 to enable HDMI 3 input in DTV Mode. Set to 2 to enable Determines availability and signal type/level (fixed speaker, HDMI 3 input in PC Mode. Set to 0 to disable display panel HDMI variable speaker, or fixed line level [amplifier]) of the audio output to be used by external audio equipment connected to the Speaker 3 input.

  • Page 27: Installer Menu

    Installer Menu (Cont.) 104 - START MINOR CHANNEL 121 - P:C RF WAKE HR Sets Minor Start Channel number at power up. 0 = NTSC. If not Set the hour from 0 to 23 for Wake On RF. This item uses the 0, number selected is the digital channel’s Minor Start Channel 24-hour clock format.

  • Page 28: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. Note: Refer to FTG Mode information on pages 42 to 48 for details on entering FTG Mode and configuring/ editing the FTG Channel Map and FTG Installer Menu settings.

  • Page 29: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the confirmation pop-up window, select OK, and then press OK once more on the Installer Remote to exit the wizard.
  • Page 30 Custom Master TV Setup (Cont.) (Continued from previous page) Note: If you intend to clone the PTC, remember that only one TV source’s clonable setup menu settings will be cloned. Thus, for a clone programmer, the TV setup menu settings should be applicable to either an analog channel or Aux input, while for a USB device / .tll file, the TV setup menu settings should be applicable to the analog or digital channel or Aux input to which the Target TV will be set during the Teaching process.
  • Page 31 Custom Master TV Setup (Cont.) (Continued from previous page) 5. Transfer the TV setup menu settings to the commercial controller (PTC): 2-5-5 + MENU Mode Note: This step is essential for successful cloning using a USB memory device / .tll file or a clone programmer. Without this step, the PTC will not contain any of the TV setup menu settings.

  • Page 32: Menu Mode)

    Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing Channel Icons and/or Adding or Editing Changing icons and/or adding or editing custom text labels Custom Text Labels in the Channel-Time Display can only be done if there are channels that have been transferred to the TV’s PTC either during Master TV Setup If there is no pre-assigned icon for a channel, you can add (see pages 28 to 31) or by cloning.

  • Page 33: Cloning Overview

    Cloning Overview IMPORTANT CLONING INFORMATION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 28): • Using a USB memory device / .tlx file • Using a USB memory device / .tll file •...

  • Page 34: Usb Cloning Procedures

    • If the wizard is displayed, the TV is in the required factory default state. If desired, you can complete the Teaching process via the EZ-Manager Wizard (see “USB Configuration” on page 16) or using the LG Smart Install utility (see “LG Smart Install Utility” on pages 17 to 18). To continue with this procedure, exit the wizard: Use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK.
  • Page 35 Note: This step restores factory default settings on the TV, which will in turn re-activate the EZ-Manager Wizard. Either use the wizard or the LG Smart Install utility to finish this process, or exit the wizard (see step 1) and then continue with step 3.

  • Page 36: Learning / Teaching A Master Tv Setup Using A Usb Memory Device / .Tll File

    • If the wizard is displayed, the TV is in the required factory default state. If desired, you can complete the Teaching process via the EZ-Manager Wizard (see “USB Configuration” on page 16) or using the LG Smart Install utility (see “LG Smart Install Utility” on pages 17 to 18). To continue with this procedure, exit the wizard: Use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK.

  • Page 37: Usb Cloning Procedures

    Note: This step restores factory default settings on the TV, which will in turn re-activate the EZ-Manager Wizard. Either use the wizard or the LG Smart Install utility to finish this process, or exit the wizard (see step 1) and then continue with step 3.

  • Page 38: Clone Programmer Cloning Procedures

    Clone Programmer Cloning Procedures Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Cloning is accomplished using the TV/clone programmer MPI ports for TLL-1100A Clone TV Link communication (see figure). Programmer Loader TLL1100A Antenna Ready or CATV TLL-1100A Cloning Notes •...
  • Page 39 (5) DISPLAY TV SETUP Since the TLL-1100A’s time cannot be set directly, the current time needs (6) DISPLAY CLONE SETUP to be copied from an LG TV equipped with an enabled MPI port. CLONE CLOCK = XX:XX CLOCK = XX:XX After the time is copied to the TLL-1100A clone programmer, the current THE CLONE IS VERSION VX.X.X...

  • Page 40: Learning / Teaching A Master Tv Setup Using An Lt2002 Clone Programmer

    Clone Programmer Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using an LT2002 Clone Programmer Cloning is accomplished using the TV/clone programmer MPI ports for communication (see figure). LT2002 Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 33 before Cable Antenna beginning any cloning procedures.

  • Page 41: Clone Programmer Cloning Procedures

    Since the LT2002’s time cannot be set directly, the current time needs to be TO CHANGE MENU ITEMS, PRESS copied from an LG TV equipped with an enabled MPI port. CHANNEL KEYS OR DIGITS. After the time is copied to the LT2002 clone programmer, the current time will be TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER.

  • Page 42: Ftg Mode Of Operation

    • Pro:Centric data delivery over RF. FTG Mode requires that you use LG FTG File Manager PC software to create an FTG Configuration (.tlx) file. In this mode, the CPU is the owner of the FTG Channel Map and must be configured with an FTG Channel Map and FTG Installer Menu settings using one of the following processes: •...

  • Page 43: Determining The Tv Operating Mode

    FTG Mode of Operation (Cont.) Determining the TV Operating Mode To determine the operating mode of the TV, press MENU SETTINGS on the Installer Remote. The menu displayed depends on the operating mode. See examples on following page. If the Function Menu appears, the TV is in a mode (FTG, PPV, etc.) that does not allow the end user to change the fundamental TV setup.

  • Page 44: Creating An Ftg Configuration File Using The Ftg File Manager

    FTG Mode of Operation (Cont.) Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration file using the FTG File Manager.
  • Page 45 FTG Mode of Operation (Cont.) (Continued from previous page) Note: To remove an individual item from the FTG Configuration List or the TV Setup Menu List, click on/ highlight the item to be removed, and then click the Remove Item button directly above the applicable “List”...

  • Page 46: Teaching Ftg Configuration To A Tv

    Note: If the EZ-Manager Wizard appears on the screen when you turn ON the TV, you can complete the Teaching process via the wizard (see “USB Configuration” on page 16). Note: You may also use the LG Smart Install utility to complete this process. See “LG Smart Install Utility” on pages 17 to 18 for further information.

  • Page 47: Learning Ftg Configuration From A Tv

    FTG Mode of Operation (Cont.) Learning FTG Configuration from a TV To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 44 to 45. However, if necessary, this option enables you to save (Learn) an FTG Configuration file from an LP62xH TV to a USB memory device.

  • Page 48: Optional Manual Configuration / Tv Setup

    FTG Mode of Operation (Cont.) Optional Manual Configuration / TV Setup The manual configuration procedures below should only be performed if you do not know the RF channels at the site and need to “Learn” FTG Configuration from an LP62xH TV as described on the previous page. Ensure the TV is in Pass-through Mode before you begin.

  • Page 49: Ftg File Manager Utilities Overview

    FTG File Manager Utilities Overview FTG File Manager Main Screen The FTG File Manager main screen enables you to compile, modify, and save FTG Configuration (.tlx) files. It also allows you to assign a Zone designation to each Installer Menu profile, if desired (see Reference section, “Using the TV Zoning Feature,”...

  • Page 50: Ftg Channel Map Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP EDIT/ADD MAP Click to open the FTG Click to display a printable Channel Map Editor to create FTG Channel Map Report.

  • Page 51: Ftg Channel Map Editor

    FTG File Manager Utilities Overview (Cont.) FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number. Then, Enter custom labels and select icons Check/select Encrypted, OSD, assign the RF, Major, and Minor channel...

  • Page 52: Ftg Installer Menu Configuration Utility

    FTG File Manager Utilities Overview (Cont.) FTG Installer Menu Configuration Utility CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters.

  • Page 53: Remote Jack Pack / Tv Connections & Setup

    Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1).

  • Page 54: Device

    The following procedure describes how to update TV/PTC software using the USB Download Menu, though you may also use the new LG Smart Install utility to upgrade software, if desired. See “LG Smart Install Utility” on pages 17 to 18 for further information.

  • Page 55: Device

    The following procedure describes how to download a splash screen image using TV Software Update (Expert) TV S the USB Download Menu, though you may also use the new LG Smart Install [ Current utility to download the splash image, if desired. See “LG Smart Install Utility” on EPK : 03.

  • Page 56: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 32LP62xH 39LP62xH 42LP62xH Item 099 Power Power Power Back Lighting Percent Percent Percent Consumption Consumption Consumption (Static) Savings Savings...

  • Page 57: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS Installer STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Menu Item Installer Menu 0x41 SOURCES CURRENT AV 046 START ENABLED (R/W) SOURCE (R) SOURCE (R) AUX SRCE (Start Aux Installer...

  • Page 58: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page.

  • Page 59: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature (Cont.) Inputs Item 042 Installer Menu Value Display HDMI 1 HDMI 2 HDMI 3 Enabled Disabled Disabled Disabled Disabled DDDDXXX0 Disabled Enabled Disabled Disabled Disabled DDD4XXXD Enabled Enabled Disabled Disabled Disabled DDD4XXX0 Disabled Disabled Disabled Disabled Enabled DD5DXXXD...

  • Page 60: Rjp Model List & Input Auto-Sensing Hierarchy

    Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-201M • RJP-301B • RJP-401B RJP Input Auto-sensing Hierarchy Priority Video...

  • Page 61: Restoring Factory Defaults On The Tv(S)

    Reference: Restoring Factory Defaults on the TV(s) This section describes how to restore factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through Mode.

  • Page 62: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature The Zoning feature available for these TV models enables installers to use the FTG File Manager to create localized configurations for TVs in selected locations, or “Zones,” within the installation environment. Zones can be designated for multiple FTG Installer Menu and/or TV Setup Menu profiles. Zone restrictions can also be assigned to individual channels in the FTG Channel Map.

  • Page 63: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature (Cont.) Example: For the purposes of this example, the FTG Configuration (.tlx) file being used to configure the TVs at the site contains multiple Installer Menu and TV Setup Menu profiles with different Zone designations, as well as several channels with Zone restrictions.

  • Page 64: Lp62Xh Rear And Side Jack Panels

    Reference: LP62xH Rear and Side Jack Panels OPTICAL AUDIO OUT HDMI/DVI IN Use for amps and home theater systems. Connection for HDMI/DVI Note: When the TV is OFF, this port is not output from external device. enabled. UPDATE AUDIO/VIDEO IN Restricted to software updates.

  • Page 65: Stereo Speaker Setup

    Reference: Stereo Speaker Setup The three-contact (left, right, ground) SPEAKER OUT jack on the LP62xH rear panel provides stereo EXTERNAL SPEAKER_R- (Sleeve) speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio EXTERNAL SPEAKER_R+ (Ring 2) equipment.

  • Page 66: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 67: Troubleshooting

    IR path to TV’s receiver obstructed. Remove obstructions. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible Installer Remote. Contact your LG dealer. 206-4231...

  • Page 68: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU on the...

  • Page 69: Clone Programmer Troubleshooting

    Then redo Learn/Teach. (Learning usually takes about 90 seconds; Teaching usually takes 3 to 4 minutes.) Remote does not operate Wrong Installer Remote. Only use an LG Installer Remote to operate clone programmer clone programmer. with TV. Clone menu does not dis- MPI cable not connected.

  • Page 70: Glossary Of Terms

    Refers to a particular commercial mode of Zenith proprietary security software that The process of capturing a Master TV operation within an LG TV. See also FTG unlocks access to premium content to help Setup and transferring it to a Target TV.

  • Page 71: Document Revision History / Open Source Software Notice 71

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.
  • Page 72 1-888-865-3026 www.LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trademark of LG Electronics Inc. All other trademarks or registered trademarks are the property of their respective owners. 206-4231 © Copyright 2013 LG Electronics U.S.A., Inc.

This manual is also suitable for:

32lp62xh39lp62xh42lp62xh

Table of Contents