LG 42WL30MS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. 42WL30MS
  6. Owner's manual
LG 42WL30MS Owner's Manual

LG 42WL30MS Owner's Manual

Monitor signage
Hide thumbs Also See for 42WL30MS:
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42WL30MS
47WL30MS
55WL30MS
60WL30MS
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 42WL30MS

Summary of Contents for LG 42WL30MS

  • Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 42WL30MS 47WL30MS 55WL30MS 60WL30MS www.lg.com...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS LICENSES ENTERTAINMENT - Using the Network - Connecting to a Wired Network ASSEMBLING AND - Network Status PREPARING - Using the My Media Accessories - Connecting USB Storage Device and Optional Accessories Using Signage Device Parts and Buttons - Browsing Files Connecting the Stand - Viewing Movies Connecting the Speaker Using the Mounting Cable Tie - Viewing Photos Using the IR Receiver - Listening to Music Portrait Layout - Viewing the Contents List Mounting on a Wall - DivX® VOD Guide - Using PIP/PBP...
  • Page 3 TABLE OF CONTENTS TROUBLESHOOTING SPECIFICATIONS IR CODES CONTROLLING THE MULTIPLE PRODUCT Connecting the Cable RS-232C Configurations Communication Parameter Command Reference List Transmission / Receiving Protocol...

  • Page 4: Licenses

    LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. NOTE The warranty will not cover any damages caused by using the product in an excessively dusty environment.

  • Page 5: Assembling And Preparing

    ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. Power Cord D-sub 15-pin Signal Cable Remote Control and Batteries IR Receiver Magnetic sheet CD(Owner's Manual, Mounting Cable Tie SuperSign Program/ Manual)/ * Two cable ties are provided with the 60WL30MS model. Cards CAUTION Do not use any pirated items to ensure the safety and product life span. Any damages or injuries by using pirated items are not covered by the warranty. NOTE The accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

  • Page 6: Optional Accessories

    ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand ST-420T(42WL30MS) ST-470T(47WL30MS) SP-2000 Cable holder/ ST-550T(55WL30MS) Speaker Cable Tie ST-550T(60WL30MS) Screws Screws Diameter 4.0 mm x Pitch 0.7 mm x Diameter 4.0 mm x Pitch 0.7 mm x Length 16 mm (Included Spring Washer) Length 8 mm (Included Spring Washer) Stand kit Speaker kit NC1000/NC1100 Screws CD(Owner's Manual)/ NA1000/NA1100 Cards Media Player Media Player kit NOTE Cable holder/cable tie may not be available in some areas or for some models.

  • Page 7: Parts And Buttons

    ASSEMBLING AND PREPARING Parts and Buttons Screen Buttons Connection Panel Description Moves the selection up and down. Adjusts the volume level. Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Accesses the main menus, or saves your input and exits the menus. Changes the input source. Turns the power on or off.

  • Page 8: Connecting The Stand

    ASSEMBLING AND PREPARING Connecting the Stand Connecting the Speaker - Only on some models. - Only on some models. Place a soft cloth on the table and put the Connect the input signal cable to the monitor product with the screen facing downward. before installing the speakers. Use a cable tie to organize the cables. Mount the speaker by using a screw as shown in the following. Make sure the power cable is disconnected. Use the screws to secure the stand on the rear side of the product as shown in the diagram. Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables.

  • Page 9: Using The Mounting Cable Tie

    ASSEMBLING AND PREPARING Using the Mounting Cable 55WL30MS First, connect the input signal cable to be used. Insert the cable tie into the bottom hole on the back as shown in the figure to organize cables. 42WL30MS 60WL30MS 47WL30MS...

  • Page 10: Using The Ir Receiver

    ASSEMBLING AND PREPARING Using the IR Receiver Using the Kensington security system The Kensington security system connector is This allows a remote control sensor to be placed located at the back of the monitor set. For more in a custom location. The IR receiver is made information of installation and using, refer to the with a magnet. Attach the magnetic sheet to the manual supplied with the Kensington security desired position on the product. It is recommended system or visit http://www.kensington.com . to attach it to the location illustrated in the figure below. Connect the Kensington security system cable between the monitor set and a table. NOTE Portrait Layout The Kensington security system is optional. You can obtain additional accessories from most electronics stores. To install in portrait mode, rotate the set counterclockwise 90 degrees when looking at from the front.

  • Page 11: Mounting On A Wall

    ASSEMBLING AND PREPARING Mounting on a Wall CAUTION For proper ventilation, allow a clearance of 10 Disconnect the power cord first, and then cm on each side and from the wall. Detailed move or install the monitor set. Otherwise installation instructions are available from your electric shock may occur. dealer, see the optional Tilt Wall Mounting Bracket If you install the monitor set on a ceiling or Installation and Setup Guide. slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. D o not over tighten the screws as this may 10 cm cause damage to the monitor set and void your warranty. U se the screws and wall mounts that meet 10 cm the VESA standard. Any damages or injuries by misuse or using an improper accessory 10 cm 10 cm are not covered by the warranty. To prevent injury, this apparatus must be 10 cm securely attached to the wall in accordance with the instrallation instructions. (This only pertains to Australia.)
  • Page 12 ASSEMBLING AND PREPARING Securing the product to a wall (optional) WARNING (Depending on model) If a product is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: » Using cabinets or stands recommended by the manufacturer of the product. » Only using furniture that can safely support the product. » Ensuring the product is not overhanging the edge of the supporting furniture. » Not placing the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support. » Not standing the product on cloth or other materials placed between the product and supporting furniture. » Educating children about the dangers of Insert and tighten the eye-bolts, or product climbing on furniture to reach the product brackets and bolts on the back of the product. or its controls.

  • Page 13: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the monitor set. (POWER) ENERGY SAVING( Turns the monitor set on or off. Adjusts the brightness of the screen to reduce energy consumption. MONITOR ON / OFF Turns multiple monitors on or INPUT off simultaneously. Selects the input mode. 1/a/A Button This button selection is not Toggles between numerical applicable. and alphabetical. Number and Alphabet buttons Enters numerical or alphabetical characters depending on the setting.
  • Page 14 REMOTE CONTROL AUTO ⓘ INFO Automatically adjusts picture Views the information of the position and minimizes image currently program and the instability.(RGB input only) screen. SETTINGS W.BAL Accesses the main menus Enters the White Balance or saves your input and exit menu. menus. S.MENU (SuperSign Menu Key) This button selection is not Selects menus or options and applicable. confirms your input. Navigation buttons Scrolls through menus or options. EXIT BACK Clears all on-screen displays Allows the user to move back and returns to monitor set one step in user interaction viewing from any menu. function. TILE This button selection is not Selects the TILE Mode. applicable. ID ON/OFF USB Menu control buttons When the number of Picture...

  • Page 15: Using The Monitor

    USING THE MONITOR USING THE MONITOR Connecting to a PC RGB Connection Transmits an analog video signal from your PC to Your monitor supports the Plug & Play* feature. the monitor. Connect the PC and the monitor with the 15-pin signal cable as shown an following * Plug & Play: A PC will have a built-in driver for illustration. Select RGB input. To transmit an audio the monitor, no extra software is needed. signal, connect an optional audio cable. Back of the product. Macintosh Adapter NOTE (not included) It is recommended you use an HDMI PC/MAC connection for the best image quality. Use a shielded signal interface cable, such as D-sub 15-pin signal cable and DVI/HDMI cable, with a ferrite core to maintain standard compliance for the product. If you turn the monitor set on when the set is cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal. If you use a cable longer than the D-sub 15- (not included) pin signal cable provided, certain images may appear blurry. CAUTION Connect the signal input cable and tighten NOTE...

  • Page 16: Dvi Connection

    USING THE MONITOR DVI Connection HDMI Connection Transmits an digital video signal from your PC to Transmits the digital video and audio signals the monitor. Connect the PC and the monitor with from your PC to the monitor. Connect the PC and a DVI cable as shown the following illustration. the monitor with an HDMI cable as shown in the Select DVI input. To transmit an audio signal, following illustration. Select HDMI input. connect an optional audio cable. Back of the product. Back of the product. (not included) (not included) (not included) NOTE Use a High Speed HDMI™ Cable. Please check the PC environment if you cannot hear audio in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI-PC mode, you must set the input label to PC mode. When HDMI PC is used, a compatiblity problem might occur.

  • Page 17: Display Port Connection

    USING THE MONITOR Display Port Connection IR Receiver Connection Transmits the digital video and audio signals from Allows the use of a wired remote or IR receiver your PC to the monitor. Connect the PC and the extension. monitor with a Display Port cable as shown in the following illustrations. Select Display Port input Back of the product. source. Back of the product. (not included) NOTE Make sure the power cable is disconnected.

  • Page 18: Adjusting The Screen

    USING THE MONITOR Adjusting the Screen Customizing Image Options Customize basic and advanced options of each Selecting an Image Mode image mode for the best screen performance. Display images in its optimized settings by Press SETTINGS to access the main menus. selecting one of the preset image modes. Press the navigation buttons to scroll to Press SETTINGS to access the main menus. PICTURE and press OK. Press the navigation buttons to scroll to Press the navigation buttons to scroll to PICTURE and press OK. Picture Mode and press OK. Press the navigation buttons to scroll to Press the navigation buttons to scroll to an Picture Mode and press OK. image mode you want and press OK. Press the navigation buttons to scroll to an Select and adjust following options, and then image mode you want and press OK. press OK. Mode Description Option Description Vivid Adjusts the video image for the retail Backlight A djusts the brightness of the screen...

  • Page 19: Customizing Pc Display Options

    USING THE MONITOR Adjusting the Sound Customizing PC Display Options Customize options of each image mode for the Selecting an Sound Mode best image quality. Play the sound in its optimized settings by This function works in the following mode: selecting one of the preset sound modes. RGB[PC] mode. Press SETTINGS to access the main menus. Press SETTINGS to access the main menus. Press the navigation buttons to scroll to AUDIO Press the navigation buttons to scroll to and press OK. PICTURE and press OK. Press the navigation buttons to scroll to Sound Press the navigation buttons to scroll to Screen Mode and press OK. and press OK. Press the navigation buttons to scroll to a Select and adjust following options, and then sound mode you want and press OK. press OK. Option Description Mode Description Resolution Selects a proper resolution. Standard Select when you want standard-quality sound.

  • Page 20: Customizing Sound Options

    Input mode Description Press the navigation buttons to scroll to a Watch video from a VCR or other sound mode you want and press OK. external devices. Select and adjust following options, and then Component Watch the contents in a DVD or press OK. other extemal devices, or through a digital set-top box View a PC display on the screen HDMI Watch contents in a PC, DVD Option Description of digital set-top box other high Infinite LG's Infinity Sound option provides definition devices Sound 5.1 channel stereo sound from two DVI-D Watch contents in a PC, DVD speakers. of digital set-top box other high Treble Controls the dominant sounds in the definition devices output. When you turn up the treble, Display Port Watch contents in a PC, DVD it will increase the output to the lower of digital set-top box other high frequency range. definition devices Bass Makes the output sound softer. If the...

  • Page 21: Adjusting Aspect Ratio

    USING THE MONITOR Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set. CAUTION If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. To prevent image sticking, do not play a still image for more than two hours. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. Recommended operation time for optimum performance and reliability is 12 hours or less per day. NOTE You can also change the image size by accessing the main menus. The Just Scan mode operates when a video signal has resolution of 720p or higher. MODE Component HDMI Aspect Ratio 16:9 Just Scan Zoom Cinema Zoom 1...
  • Page 22 USING THE MONITOR - 16:9 : This selection will allow you to adjust the - 4:3 : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs). screen. - Just Scan : This Selection will allow you view - Zoom : This selection will allow you to view the the picture of best quality without loss of original picture without any alteration, while filling the picture in high resolution image. Note: If there is entire screen. However, the top and bottom of noise in original Picture, You can see the noise the picture will be cropped. at the edge. Just Scan - 1:1 : The aspect ratio is not adjusted from the - Cinema Zoom 1 : Choose Cinema Zoom original. (Only Display Port PC, HDMI PC, DVI when you want to enlarge the picture in correct PC, RGB PC) proportion. Note: When enlarging or reducing the picture, the image may become distorted.

  • Page 23: Entertainment

    ENTERTAINMENT ENTERTAINMENT Using the Network To set up the network settings: (Even if your dis- play has already connected automatically, running Connecting to a Wired Network setup again will not harm anything), Press SETTINGS to access the main menus. Connect the display to a local area network (LAN) Press the navigation buttons to scroll to NET- via the LAN port as shown in the following illustra- WORK and press OK. tion and set up the network settings. Only supports wired network connection. Press the navigation buttons to select Network After making a physical connection, a small Setting and press OK. number of home networks may require the display If you already set network setting, select network settings to be adjusted. For most home Resetting. The new connection settings resets networks, the display will connect to automatically the current network settings. without any adjustments. For detail information, contact your internet pro- Select IP Auto Setting or IP Manual Setting. vider or router manual. - If selecting IP Manual Setting, press the navigation and Number buttons. IP addresses will need to be input manually.

  • Page 24: Network Status

    Tips for Network setting Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or Network Status connect the power cable again. Depending on the internet service provider (ISP), the number of devices that can receive Press SETTINGS to access the main menus. internet service may be limited by the applica- Press the navigation buttons to scroll to NET- ble terms of service. For details, contact your WORK and press OK. ISP. LG is not responsible for any malfunction of the Press the navigation buttons to select Network display and/or the internet connection feature Status. due to communication errors/malfunctions as- Press OK to check the network status. sociated with your internet connection, or other connected equipment. When you are finished, press EXIT. LG is not responsible for problems within your internet connection. You may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. Option Description Some internet connection operations may not Setting Return to the network setting menu.

  • Page 25: Using The My Media

    ENTERTAINMENT Using the My Media Tips for using USB storage devices Only a USB storage device is recognizable. Connecting USB Storage Device If the USB storage device is connected and Using Signage Device through a USB hub, the device is not recog- nizable. Connect USB storage devices, such as a USB A USB storage device using an automatic flash memory, or an external hard drive, to the recognition program may not be recognized. monitor set, or use Signage (Internal storage de- A USB storage device which uses its own vice) to use multimedia features. Connect a USB flash memory, or USB memory driver will not be recognized. card reader, to the monitor set as shown in the The recognition speed of a USB storage figure below to display the MY MEDIA screen. device may depend on each device. Please do not turn off the display or unplug the USB device when the connected USB storage device is working. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
  • Page 26 ENTERTAINMENT If the USB HDD does not have an external Do not remove the Signage device (internal power source, the USB device may not be storage device) or turn off the display detected. So be sure to connect the external while copying a file from the USB device power source. to the Signage device or deleting a file in the Signage device. The device may be - Please use a power adaptor for an external damaged or the system may be affected. power source. The Copy and Delete functions may not be If your USB memory device has multiple available if you use a USB device formatted partitions, or if you use a USB multi-card by the NTFS file system, which is provided reader, you can use up to 4 partitions or USB by the Windows operating system, or a read- memory devices. only storage device. If a USB memory device is connected to a USB multi-card reader, its volume data may If the files of the contents list are in the not be detected. storage device connected to the monitor set, If the USB memory device does not work the content is played when the monitor is properly, disconnect and reconnect it. powered on. When both USB storage device How fast a USB memory device is detected and internal storage device are connected to differs from device to device. the monitor, the monitor plays the content of If the USB is connected in Standby Mode, the most recently recognized storage device. that drive will automatically be loaded when the display is turned on. The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

  • Page 27: Browsing Files

    ENTERTAINMENT Browsing Files Page 1/1 Photo List Browse for a file saved on a USB storage or Drive1 Page 1/1 Signage device (internal storage device). Press SETTINGS to access the main menu. Press the search button to scroll to MY MEDIA and press OK. Press the Search button to go to the Movie Move View PAGE Page Change List, Photo List, Music List, or Content List Change device To Photo List Change Numbers Mark Mode Exit that you want, and press OK. Description Upper level folder Movie List Photo List Music List Contents List Current page/Total pages Contents under the folder focused on Current page/ Total pages of contents If a USB storage device is connected, the screen appears as shown below. Press the under the folder focused on Navigation button to go to USB or Signage Remote button and press OK.

  • Page 28: Supported File Format

    ENTERTAINMENT Content File Extensions : *.cts/ *.cse Supported file format (when Movie using Type Supported file format File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*. SuperSign Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*. Manager) RP,TP,ASF,WMV,FLV) wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*. mkv(motion JPEG) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. Video format: MPEG1, MPEG2, MPEG4,H.264/ avi(motion-jpeg)/*. AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting 1.10-beta1/2, JPEG, VC1(WVC1/WMV3) file Audio format: MP2,MP3,Dolby Digital, LPCM, Video format : DivX3.11, DivX4, DivX5.x, DivX6, AAC, HE-AAC,LPCM, ADPCM, WMA, MP3 Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 File Item Profile beta-1/beta-2,...

  • Page 29: Viewing Movies

    ENTERTAINMENT Mark Mode - USB device Viewing Movies Page 1/2 Play video files saved on a USB storage or Movie List Signage device (internal storage device). Mark Mode Page 1/1 Press SETTINGS to access the main menu. 001. - B01.mp4 002. - B02.mp4 003. - B03.mp4 004. - B04.mp4 01:00 02:00 03:00 04:00 005. - B05.mp4 Press the navigation button to scroll to MY 05:00 MEDIA and press OK. Press the navigation button to scroll to Movie Move Mark PAGE Page Change List and press OK.
  • Page 30 ENTERTAINMENT Tips for using playing video files When plays a video, you can set the following: Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the sup- ported languages are not available. The screen may suffer temporary interrup- tions (image stoppage, faster playback, etc.) when the audio language is changed. 01:02:30 / 02:30:25 A damaged movie file may not be played ꕗ ꕖ ꕘ ꕚ ꕙ MENU Option Hide Exit correctly, or some player functions may not be usable. Movie files produced with some encoders Remote Description may not be played correctly. button If the video and audio structure of recorded Stops the playback file is not interleaved, either video or audio is Plays a video outputted.
  • Page 31 ENTERTAINMENT Video options Size Selects your desired Subtitle size during movie play. Press SETTINGS to access the Pop-Up Repeat Turn on/off repeat function of menus. movie playback. When turned on, the file within the folder will be played Press the navigation buttons to scroll to Set back repeatedly. Even when the Video Play., Set Video. or Set Audio. and repeated playback is turned off, it can press OK. run the playback if the file name is similar to the previous file. NOTE The option values changed in Movie List NOTE do not affect Photo List or Music List. Therefore, they are not affected by option Only 10,000 of sync blocks can be supported values changed in Photo List or Music List. within the subtitle file. The option values changed in Photo List When playing a video, you can adjust the and Music List do affect each other.

  • Page 32: Viewing Photos

    ENTERTAINMENT Mark Mode - USB device Viewing Photos Page 1/2 View photo files saved on a USB storage or Photo List Signage device (internal storage device). Mark Mode Page 1/1 Press SETTINGS to access the main menu. Press the navigation button to scroll to MY MEDIA and press OK. Press the navigation button to scroll to Photo Move Mark PAGE Page Change List and press OK. Mark All Exit Mark Mode View Marked Copy to Signage Delete Press the navigation button to go to USB or Signage and press OK. Mark Mode - Signage device Please select the device. Page 1/2 Photo List Mark Mode Page 1/1 Signage Previous Move...
  • Page 33 ENTERTAINMENT When plays a video, you can set the following: Option Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). TransitionEffect: Set the view mode of the slideshow. y BGM: Selects a music folder for the background music. NOTE You cannot change the music folder while the background music is playing. You can only select the MP3 folder saved on the device that 2/13 currently displays the photo. ꔦ Hide Slideshow MENU Option Exit ꕖ ꕗ Hide Hides the option window. Options Number of selected photos To display the options, press OK. Exit Return to Photo List. Menu Description Slideshow Starts or stops a slideshow with se- lected photos. If there are no selected photos, all photos saved in the current folder display during a slideshow. To set...
  • Page 34 ENTERTAINMENT If you select Set Photo View., you can make adjustments as shown below: Press the navigation buttons to scroll to select Slide Speed, Transition Effect, or BGM. Press the navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide. Door Open Pushes the current slide like opening or closing the door as it plays to the next slide. /Close Shutter Pushes the current slide like drawing or pulling down the blind as it plays to the next slide Fade In Fades the slide out slowly before playing to the next slide. For more details about the Set Video. menu, see the CUSTOMIZE SETTINGS section. See page 42. For more details about the Set Audio. menu, see the CUSTOMIZE SETTINGS section. See page 45.

  • Page 35: Listening To Music

    ENTERTAINMENT Mark Mode - USB device Listening to Music Page 1/2 View photo files saved on a USB storage or Music List Signage device (internal storage device). Mark Mode Page 1/1 Press SETTINGS to access the main menu. 001. - B01.mp3 002. - B02.mp3 003. - B03.mp3 004. - B04.mp3 01:00 02:00 03:00 04:00 Press the navigation button to scroll to MY 005. - B05.mp3 05:00 MEDIA and press OK. Press the navigation button to scroll to Music Move Mark PAGE Page Change...
  • Page 36 ENTERTAINMENT Tips for playing music files When listening to music, you can set the following: This unit cannot support the ID3 Tag embedded MP3 files. Page 1/2 Music List Page 1/2 NOTE Non-supported files are displayed the pre- 001. - B01.mp3 002. - B02.mp3 003. - B03.mp3 004. - B04.mp3 005. - B05.mp3 01:00 02:00 03:00 04:00 05:00 view image by icon only 002. - B02.mp3 00:40 / 02:00 ꕗ ꕖ ꕘ ꕚ ꕙ Play with Photo MENU Option Hide Exit Abnormal files are displayed in the form of bitmap A damaged or corrupted music does not play Remote but displays 00:00 in playtime.
  • Page 37 ENTERTAINMENT Music options Press SETTINGS to access the pop-up menus. Press the navigation buttons to scroll to Set Au- dio Play. or Set Audio. and press OK. NOTE The option values changed in Movie List do not affect Photo List or Music List. Therefore, they are not affected by option values changed in Photo List or Music List. The option values changed in Photo List and Music List do affect each other. When you select the Set Audio Play, Press the navigation buttons to scroll to select the Repeat or Random. Press the navigation buttons to scroll to make appropriate adjustments.

  • Page 38: Viewing The Contents List

    ENTERTAINMENT Mark Mode - USB device Viewing the Contents List Page 1/2 Plays back the stored files using the Export option Contents List Mark Mode in SuperSign Manager. Page 1/1 test1.cts test2.cts test3.cts test4.cts 07/01/2011 07/01/2011 07/01/2011 07/01/2011 Press SETTINGS to access the main menu. test5.cts 07/01/2011 Press the navigation button to scroll to MY MEDIA and press OK. Move Mark PAGE Page Change Press the navigation button to scroll to Exit Mark Mode Exit Copy to Signage Delete Contents List and press OK. Press the navigation button to go to USB or Mark Mode - Signage device Signage and press OK.

  • Page 39: Divx® Vod Guide

    ENTERTAINMENT DivX® VOD Guide DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 Press SETTINGS to access the main menus. digit DivX registration code from your device at Press the navigation buttons to scroll to MY www.divx.com/vod. MEDIA and press OK. Press the Blue button. Press SETTINGS to access the main menus. Press the navigation buttons to scroll to Deac- Press the navigation buttons to scroll to MY tivation and press OK. MEDIA and press OK. Press the navigation buttons to select Yes to Press the Blue button. confirm. Press the navigation buttons to scroll to DivX Reg. Code and press OK. Deregistration code : View the registration code of your display. ******** Deregister at http://vod.divx.com Continue with registration? When you are finished, press EXIT. When you return to the previous menu, press BACK.

  • Page 40: Using Pip/Pbp

    ENTERTAINMENT Using PIP/PBP Select the PIP or PBP icon from the play list. Displays videos and photos stored on the USB or Signage device (internal storage device) on a single monitor with the main and sub screens divided. (See page 50.) Press SETTINGS to access the main menus. Press the navigation buttons to scroll to OP- 01:02:30 / 02:30:25 TION and press OK. ꕗ ꕖ ꕘ ꕚ ꕙ MENU Option Hide Exit Press PIP/PBP to select PIP or PBP and then Movie List press OK. PIP/PBP Move Prev. Mode Off Position PIP Size PBP 2/13 Select Movie List or Photo List from My ꔦ MENU Option Hide Exit Slideshow...

  • Page 41: Customizing Settings

    CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing Main Menus Press SETTINGS to access the main menus. Press the navigation buttons to scroll to one of the following menus and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See page 42.) AUDIO (See page 45.) Adjusts the image size, Adjusts the sound quality, quality, or effect. effect, or volume level. TIME (See page 46.) Sets the time, date, or Timer feature. PICTURE AUDIO TIME MIDIA (See page 25.) OPTION (See page 47.) Display and play movie, Customizes the general photo and music contents settings. OPTION NETWORK MY MEDIA stored on your USB or Signage device (Internal storage device).

  • Page 42: Picture Settings

    CUSTOMIZING SETTINGS PICTURE Settings PICTURE Move • Aspect Ratio : 16:9 ꔋ Press SETTINGS to access the main menus. • Energy Saving : Off • Smart Energy Saving : Off Press the navigation buttons to scroll to PICTURE and • Picture Mode : Standard press OK. • Backlight • Contrast Press the navigation buttons to scroll to the setting or • Brightness option you want and press OK. • Sharpness - To return to the previous level, press BACK. • Color • Tint When you are finished, press EXIT. • Color Temp. When you return to the previous menu, press • Advanced Control BACK. • Picture Reset • Screen The available picture settings are described in the following: Setting Description Aspect Ratio Changes the image size to view images at its optimal size (See page 21.).
  • Page 43 CUSTOMIZING SETTINGS Setting Description SCREEN Customizes the PC display options in RGB mode. (In RGB Option Mode Only) Resolution Selects a proper resolution. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Adjusts the options when the picture is not clear, especially when characters are Phase shaky, after the auto configuration. Reset Restores the options to the default setting. Picture Mode options Setting Description Backlight A djusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. You may use brightness when the dark part of the picture is saturated. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
  • Page 44 CUSTOMIZING SETTINGS Advanced Control Setting Description Dynamic Adjusts the contrast to keep it at the best level according to the brightness of the screen. The Contrast picture is improved by making bright parts brighter and dark parts darker. (Function works in the (Off/High/ following mode - Component, HDMI-DTV, DVI-DTV) Medium/Low) Dynamic Color Adjusts screen Colors so that they look livelier, richer, and clearer. This feature enhances (Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (Function works in the following mode - Component, HDMI-DTV, DVI-DTV) Clear White Make the white area of screen brighter and more white. (Off/High/Low) Skin Color It detects the skin area of video and adjusts it to express a natural skin color. (-5 to 5) Noise educes screen noise without compromising video quality. (Function works in the following mode - Reduction Component, HDMI-DTV, DVI-DTV) (Off/High/ Medium/Low) Digital Noise This option reduces the noise produced while creating digital video signals. Reduction (Off/High/ Medium/Low) Gamma Set your own gamma value. On the monitor, high gamma values display whitish images and low...

  • Page 45: Audio Settings

    Mode Standard The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music. Cinema Select this option to enjoy sublime sound. Sport Select this option to watch sports broadcasting. Game To enjoy dynamic sound when playing a game. NOTE If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments. Option Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Bass Makes the output sound softer. When you turn up the bass, it will increase the output to the lower Frequency. Reset Resets the sound mode to the default setting. Digital Audio HDMI/Display Port: Outputs the sound of digital signal from HDMI through the monitor speaker. Input Audio In: Outputs the sound through the monitor speaker by connecting HDMI to the Audio In port. Speaker ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.) OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.

  • Page 46: Time Settings

    CUSTOMIZING SETTINGS TIME Settings TIME Move • Clock ꔋ Press SETTINGS to access the main menus. • Off Time : Off Press the navigation buttons to scroll to TIME and press OK. • On Time : Off • Sleep Timer : Off Press the navigation buttons to scroll to the setting or option • Power On Delay : Off you want and press OK. • Auto Off : 15 min. - To return to the previous level, press BACK.

  • Page 47: Option Settings

    CUSTOMIZING SETTINGS OPTION Settings OPTION Move • Language ꔋ Press SETTINGS to access the main menus. • ISM Method : Normal Press the navigation buttons to scroll to OPTION and press • DPM Select : On • Fail Over : Off • Factory Reset Press the navigation buttons to scroll to the setting or option • Set ID • Tile Mode you want and press OK. • PIP/PBP - To return to the previous level, press BACK. •...
  • Page 48 CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to DVI Cable and distributor. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1 to 15 r = 1 to 15) - 15 x 15 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. Auto Config. Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position Moving the screen position horizontally and vertically. Size Adjust the horizontal and vertical size of the screen taking into account the size of the bezel. Natural The image is omitted by the distance between the screens to be naturally shown. Reset Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. Option Mode Sets the type of secondary screen. *OFF: Disables the secondary screen.
  • Page 49 CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. When using 2 monitors When using 4 monitors When using 9 monitors When the Tile Mode option is disabled ID 2 ID 2 ID 3 ID 2 ID 1 ID 1 ID 1 ID 4 ID 6 ID 5 ID 3 ID 4 Tile ID ID 9 ID 8 ID 7 When using 16 monitors When using 25 monitors ID 3 ID 4 ID 5 ID 1 ID 2 ID 1 ID 3 ID 4 ID 2 ID 8 ID 9 ID 10 ID 6 ID 7 ID 6...
  • Page 50 CUSTOMIZING SETTINGS PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See page 40.) Mode NOTE *PIP (Picture In Picture): Displays the Sub screen in the main screen. The subscreen is only supported when using the *PBP (Picture By Picture): Displays the Sub USB device. screen next to the main screen. Main screen Component screen Main HDMI/ DVI-D/ DP You can only change the size and position in PIP mode. With PBP selected, the Aspect Ratio option in the Position PICTURE menu is disabled (Fixed as 16:9). Adjusts the position of the subscreen (top left, While running the PBP function, the Tile Mode function does not work. bottom left, top right, bottom right) You must select the output sound before running the PIP or PBP functions. (Select either Main or Sub.) If you fail to select Main or Sub from the sound selection box, and if the OSD disappears after either a period of time or when the Exit or Back key is pressed, the PIP/PBP subscreen is not...

  • Page 51: Picture Id Settings

    CUSTOMIZING SETTINGS Picture ID Settings If you press the left/right buttons or the red ON button for PICTURE ID repeatedly, the Picture Picture ID is used to change the settings of a ID toggles between OFF and 0 to 4. Assign the specific display using a single IR receiver for Set ID as you like. multi-vision. Communication is possible between a monitor with an IR receiver and other monitors Picture ID using RS232C cables. Each monitor is identified by a Set ID. If you assign the Picture ID using ◄ ► AUDIO the remote control, only displays with the same (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT Picture ID and Set ID can be controlled remotely. Close RS-232C IN RS-232C IN RS-232C IN REMOTE CONTROL IN...

  • Page 52: Network Settings

    CUSTOMIZING SETTINGS NETWORK Settings NETWORK Move • Player Name ꔋ Press SETTINGS to access the main menus. • Network Setting : Wired • Network Status : Not connected Press the navigation buttons to scroll to NETWORK and • Server IP Setting press OK. • Server IP Status : Not connected Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description...

  • Page 53: Making Connections

    MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the monitor set’s back panel. Find an external device you want to connect to your monitor set shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. HD Receiver COMPONENT COMPONENT COMPONENT HDMI HDMI HDMI DVI-D DVI-D DVI-D Speaker Gaming device Camcorder/Camera HDMI COMPONENT COMPONENT DVI-D HDMI HDMI Display Port DVI-D NOTE If you connect a gaming device to the monitor set, use the cable supplied with the gaming device. It is recommended you to use the optional speaker provided.

  • Page 54: External Device Connection

    MAKING CONNECTIONS External Device Connection COMPONENT Connection Transmits the analog video and audio signals from Connect a HD receiver, DVD, or VCR player to the an external device to the monitor set. Connect the monitor set and select an appropriate input mode. external device and the monitor set with the 15 pin signal to RCA cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. AV(CVBS) Connection Back of the product. Transmits the analog video and audio signals from an external device to the monitor. Connect the external device and the monitor with the 15 pin signal to RCA cable as shown on the following illustration. Back of the product. (not included) (not included) (not included) NOTE (not included) When connecting to the component port using the shared interface, the port must match up to the input source. Otherwise, noise may occur.

  • Page 55: Hdmi Connection

    MAKING CONNECTIONS HDMI Connection DVI Connection Transmits the digital video and audio signals from Transmits the digital video signal from an external an external device to the monitor set. Connect the device to the monitor set. Connect the external external device and the monitor set with the HDMI device and the monitor set with the DVI cable as cable as shown on the following illustration. shown in the following illustration. To transmit an audio signal, connect an optional audio cable. Back of the product. Back of the product. (not included) (not included) (not included) NOTE Use a High Speed HDMI™ Cable. High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

  • Page 56: Usb Connection

    MAKING CONNECTIONS USB Connection LAN Connection Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or Using a router (Switch) a USB memory card reader to the monitor set and access the USB menu to use various multimedia Switch files. Monitor Set Network Using the Internet. Network Monitor Set...

  • Page 57: Daisy Chain Connection

    MAKING CONNECTIONS Daisy Chain Connection This connection is used as an output for the digital video signal of a PC displayed on multiple monitors. Multiple DVI cables are required to connect multiple monitors. Connect the input ports of your PC and Monitor 1 using the DVI cable. Connect the output port of Monitor 1 and the input port of Monitor 2 using another DVI cable. Follow the same procedure to connect the other monitors. DVI mode Monitor 1 Monitor 2 Monitor 3 DVI Cable (not included) NOTE For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended resolution) if the signal is stable and there is no cable loss.If you want to connect more than this number of monitors, we recommended that you use a distributor. When the tile mode is configured via DVI cables, only the monitor that receives first signals can play HDCP-encrypted content. (The DVI Out port does not support HDCP.) If the signal cable between the product and your PC is too long, make sure to use the DVI booster or DVI optical cable. If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via the DVI Out port.

  • Page 58: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord y S ee if the power cord is properly connected to the outlet. connected? D oes the Out of range message y T he signal from the PC (video card) is out of the vertical or horizontal appear? frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution : 1920 x 1080 @ 60 Hz D oes the Check signal cable y T he signal cable between PC and product is not connected. Check message appear? the signal cable. y P ress the 'INPUT' menu in the remote Control to check the input signal. 'Unknown Product' message appears when the product is connected. Problem Resolution Did you install the driver?
  • Page 59 TROUBLESHOOTING The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the AUTO button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu. Do thin lines appear on the y D -Sub analog signal - Press the AUTO button in the remote control to background screen? automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. Horizontal noise appears or the y D-Sub analog signal - Press the AUTO button in the remote control to characters look blurred. automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The screen is displayed y T he proper input signal is not connected to the signal port. Connect abnormally. the signal cable that matches with the source input signal. After-image appears on the product. Problem Resolution After-image appears when the...
  • Page 60 TROUBLESHOOTING The audio function does not work. Problem Resolution No sound? y See if the audio cable is connected properly. y Adjust the volume. y S ee if the sound is set properly. Sound is too dull. y Select the appropriate equalize sound. Sound is too low. y A djust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution y S et the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. S creen color is unstable or y Check the connection status of the signal cable. Or, re-insert the PC mono-colored.

  • Page 61: Specifications

    SPECIFICATIONS SPECIFICATIONS 42WL30MS LCD Panel Screen Type 1064.67 mm Wide (42 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1064.67 mm Pixel Pitch 0.4833 mm (H) x 0.4833 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/ DVI-D/ DP : 30 kHz to 83 kHz Vertical Frequency RGB : 50 Hz to 75 Hz HDMI/ DVI-D/ DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub, DVI, HDMI, DP, Component, Audio, Speaker, IR, USB, RS-232C, LAN Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.3 A Power Consumption On Mode : 90 W Typ. Sleep Mode (RGB) : ≤ 0.5 W Sleep Mode (DP) : ≤ 0.7 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions...
  • Page 62 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 963.36 mm x 562 mm x 79 mm / 9.04 kg 963.36 mm x 626.1 mm x 235.1 mm / 10.18 kg 963.36 mm x 562 mm x 79 mm / 9.86 kg 963.36 mm x 626.1 mm x 235.1 mm / 11.0 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 63 SPECIFICATIONS 47WL30MS LCD Panel Screen Type 1192.78 mm Wide (47 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.78 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/ DVI-D/ DP : 30 kHz to 83 kHz Vertical Frequency RGB : 50 Hz to 75 Hz HDMI/ DVI-D/ DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub, DVI, HDMI, DP, Component, Audio, Speaker, IR, USB, RS-232C, LAN Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.3 A Power Consumption On Mode : 100 W Typ. Sleep Mode (RGB) : ≤ 0.5 W Sleep Mode (DP) : ≤ 0.7 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity 10 % to 80 % Storage Temperature -20 °C to 60 °C...
  • Page 64 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1075 mm x 624.8 mm x 84.5 mm / 12.3 kg 1075 mm x 693.1 mm x 263.9 mm / 13.75 kg 1075 mm x 624.8 mm x 84.5 mm / 13.05 kg 1075 mm x 693.1 mm x 298.3 mm / 14.5 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 65 SPECIFICATIONS 55WL30MS LCD Panel Screen Type 1387.80 mm Wide (55 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/ DVI-D/ DP : 30 kHz to 83 kHz Vertical Frequency RGB : 50 Hz to 75 Hz HDMI/ DVI-D/ DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub, DVI, HDMI, DP, Component, Audio, Speaker, IR, USB, RS-232C, LAN Power Rated Voltage AC 100-240 V~ 50/60 Hz 1.8 A Power Consumption On Mode : 140 W Typ. Sleep Mode (RGB) : ≤ 0.5 W Sleep Mode (DP) : ≤ 0.7 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity 10 % to 80 % Storage Temperature -20 °C to 60 °C...
  • Page 66 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1244.4 mm x 719.9 mm x 82.2 mm / 18.06 kg 1244.4 mm x 787.8 mm x 269.4 mm / 20.2 kg 1244.4 mm x 719.9 mm x 82.2 mm / 18.88 kg 1244.4 mm x 787.8 mm x 269.4 mm / 21.02 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 67 SPECIFICATIONS 60WL30MS LCD Panel Screen Type 1513.397 mm Wide (60 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1513.397 mm Pixel Pitch 0.687 mm (H) x 0.687 mm (V) Video Signal Max. Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/ DVI-D/ DP : 30 kHz to 83 kHz Vertical Frequency RGB : 50 Hz to 75 Hz HDMI/ DVI-D/ DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub, DVI, HDMI, DP, Component, Audio, Speaker, IR, USB, RS-232C, LAN Power Rated Voltage AC 100-240 V~ 50/60 Hz Power Consumption On Mode : 180 W Typ. Sleep Mode (RGB) : ≤ 0.5 W Sleep Mode (DP) : ≤ 0.7 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity 10 % to 80 % Storage Temperature -20 °C to 60 °C...
  • Page 68 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1353.8 mm x 781.4 mm x 68.3 mm / 23.12 kg 1353.8 mm x 849.4 mm x 293.8 mm / 25.26 kg 1353.8 mm x 781.4 mm x 68.3 mm / 23.94 kg 1353.8 mm x 849.4 mm x 293.8 mm / 26.08 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 69 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a Wall section for sizes of screws. ( See page 11. ) (Unit : mm) 42WL30MS 962.2 50.5 14.4 235.1 381.7 Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 70 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a Wall section for sizes of screws. ( See page 11. ) (Unit : mm) 47WL30MS 1075 84.5 51.9 14.4 263.9 337.5 Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 71 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a Wall section for sizes of screws. ( See page 11. ) (Unit : mm) 55WL30MS 49.5 1244.4 82.2 14.4 295.6 422.2 Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 72 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the Mounting on a Wall section for sizes of screws. ( See page 11. ) (Unit : mm) 60WL30MS 68.3 1353.8 55.1 14.4 293.8 476.9 Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 73 SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI/ Horizontal Vertical Resolution Resolution Component Display Port Frequency(kHz) Frequency(Hz) (DTV) 31.469 70.8 640 x 350 480i 31.468 70.8 720 x 400 576i 31.469 59.94 640 x 480 480p 37.5 640 x 480 576p 37.879 60.317 800 x 600 720p 46.875 800 x 600 1080i 49.725 74.55 832 x 624...

  • Page 74: Ir Codes

    IR CODES IR CODES All models do not support the HDMI/USB function. Some key codes are not supported depending on the model. Code (Hexa) Function Note R/C BUTTON Power INPUT R/C BUTTON MONITOR ON R/C BUTTON MONITOR OFF R/C BUTTON ENERGY SAVING ( R/C BUTTON R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTTON 1/a/A R/C BUTTON CLEAR R/C BUTTON R/C BUTTON Volume Volume R/C BUTTON R/C BUTTON AUTO R/C BUTTON MUTE R/C BUTTON BRIGHTNESS (Page UP) R/C BUTTON BRIGHTNESS (Page Down) R/C BUTTON R/C BUTTON INFO...

  • Page 75: Controlling The Multiple Product

    CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. RS-232C Cable (not included) Monitor 1 Monitor 2 Monitor 3 Monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not Standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 (Female) (Female) (Female) (Female) Communication Parameter Baud Rate : 9600 BPS Data Length : 8 bit Parity Bit : None...

  • Page 76: Command Reference List

    CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 01. Power 00 to 01 02. Input Select Refer to Input Select. 03. Aspect Ratio Refer to Aspect Ratio. 04. Energy Saving Refer to Energy Saving. 05. Picture mode Refer to Picture mode. 06. Contrast 00 to 64 07. Brightness 00 to 64 08. Sharpness 00 to 64 09. Color 00 to 64 10. Tint 00 to 64 11. Color Temperature 00 to 64 12. H Position 00 to 64 13. V Position 00 to 64 14. H Size 00 to 64 15. Auto configuration 16. Balance 00 to 64 17. Sound mode Refer to Sound mode.
  • Page 77 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 39. Tile Mode 00 to 01 40. Tile Mode Check 41. Tile ID Refer to Tile ID. 42. Tile H Position 00 to 32 43. Tile V Position 00 to 32 44. Tile H Size 00 to 32 45. Tile V Size 00 to 32 46. Natural Mode (In Tile mode) 00 to 01 47. DPM Select 00 to 01 48. FAN Control 00H to 03 49. FAN Fault Check 50. Temperature Value 51. Remote Lock/ key Lock 00 to 01 52. Key Refer to Key. 53. OSD Select 00 to 01 54. Elapsed time return 55. Serial No. Check 56. S/W Version 57. White Balance Red Gain 00 to FE 58. White Balance Green Gain 00 to FE 59. White Balance Blue Gain 00 to FE...

  • Page 78: Transmission / Receiving Protocol

    CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: S et ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set. * [Data2]: Information passed to the set. * [Data3]: Information passed to the set. * [Cr]: Carriage Return. ASCII code ‘0x0D’. * [ ]: ASCII code space ‘0x20’ Acknowledgement [Command2][ ][Set ID][ ][OK/NG][Data][x] * W hen the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the data that is sent from the PC. * I f a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any acknowledgement (ACK). * I f the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be checked (only for some functions). * Some commands are not supported depending on the model.
  • Page 79 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Energy Saving (Command: j q) To control the Power On/Off the display. To set the Energy Saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 00: Off 01 : On 01: Minimum 02: Medium Acknowledgement 03. Maximum [a][ ][Set ID][ ][OK/NG][Data][x] 04: Auto * Only when the monitor set is fully powered on, the 05. Screen Off Acknowledgement signal is returned properly. Acknowledgement * There may be a certain time of delay between the [q][ ][Set ID][ ][OK/NG][Data][x] Transmission and Acknowledgement signals. ** It may not be supported depending on the model. 02. Input Select (Command: x b) To select the Input Source for display.
  • Page 80 CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) 10. Tint (Command: k j) To adjust the screen brightness. To adjust the screen tint. * This function is available only in AV/Component Transmission input. [k][h][ ][Set ID][ ][Data][Cr] Transmission Data 00 to 64: Brightness 0 to 100 [k][j][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00 to 64: Tint R50 to G50 [h][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) 11. Color Temperature (Command: x u) To adjust the screen sharpness.
  • Page 81 CONTROLLING THE MULTIPLE PRODUCT 13. V Position (Command: f r) 16. Balance (Command: k t) To adjust the screen Vertical Position. To adjust the sound balance. * This function is available only when the Tile Mode is Transmission set to Off. [k][t][ ][Set ID][ ][Data][Cr] * The operational range varies depending on the Data 00 to 64: Left 50 to Right 50 RGB input resolution. (Only available for RGB-PC input.) Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] Transmission [f][r][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. -50 (Bottom) to max. 50 (Top) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 17. Sound Mode (Command: d y) 14.
  • Page 82 CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) 22. Volume Control (Command: k f) To adjust the Bass values. To set the playback volume. Transmission Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100 Acknowledgement Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] [f][ ][Set ID][ ][OK/NG][Data][x] 20. Speaker (Command: d v) 23. Time 1(Year/ Month/ Day) (Command: f a) To select the speaker on/off.
  • Page 83 CONTROLLING THE MULTIPLE PRODUCT 25. Off Timer(Repeat Mode/ Time) (Command: f e) 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the Off Timer(Repeat Mode/ Time) function. To set the On Timer(Repeat mode/ Time) function. Transmission Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1 1. F1 to F7 (Read data) 1. F1 to F7 (Read data) F1: Read the 1st Off Time data F1: Read the 1st On Time data F2: Read the 2nd Off Time data F2: Read the 2nd On Time data F3: Read the 3rd Off Time data F3: Read the 3rd On Time data F4: Read the 4th Off Time data F4: Read the 4th On Time data F5: Read the 5th Off Time data F5: Read the 5th On Time data F6: Read the 6th Off Time data F6: Read the 6th On Time data F7: Read the 7th Off Time data...
  • Page 84 CONTROLLING THE MULTIPLE PRODUCT 27. On Timer Input (Command: f u) 28. Sleep Time (Command: f f) To select an external input for the current On Time To set the Sleep Time. setting and add a new schedule or change the Transmission existing schedule. [f][f][ ][Set ID][ ][Data][Cr] Transmission Data 00: Off (Sleep Timer off) [f][u][ ][Set ID][ ][Data1][Cr] 01: 10 min. [f][u][ ][Set ID][ ][Data1][Data2][Cr] 02: 20 min. 03: 30 min. Data (Add schedule) 04: 60 min. 20: Input (AV) 05: 90 min. 40: Component 06: 120 min. 60. RGB 07: 180 min. 70: DVI-D 08: 240 min.
  • Page 85 CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) 34. Power Indicator (Power Light) (Command: f p) To set the Auto Off function. To set the Power Indicator (Power Light) function. Transmission Transmission [f][g][ ][Set ID][ ][Data][Cr] [f][p][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 15 minutes) Data 00: Off 01: 15 min.(Off after 15 minutes) 01: On ** It may not be supported depending on the model. Acknowledgement Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] [p][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set the language for OSD.
  • Page 86 CONTROLLING THE MULTIPLE PRODUCT 37. Fail Over Input Select (Command: m j) 40. Tile Mode Check (Command: d z) To select the input source for auto switch. To check Tile Mode status. * This command is only available when the fail over Transmission (auto) mode is set to Custom. [d][z][ ][Set ID][ ][Data][Cr] Transmission Data FF: Check Tile Mode status. [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] ** It may not be supported depending on the model. [ ][Data4][ ][Data5][Cr] Acknowledgement Data 1 to 5 (Priority 1 to 5) [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 60: RGB Data1 00: Tile Mode Off 70: DVI-D 01: Tile Mode On 90: HDMI(HDMI1) Data2 00 to 0F: Tile Row C0: Display Port...
  • Page 87 CONTROLLING THE MULTIPLE PRODUCT 43. Tile V Position (Command: d f) 46. Natural Mode (In Tile Mode) (Command : d j) To adjust the Tile Vertical position. To display the image naturally, the part of the image * This function is available only when the Natural that would normally be displayed in the gap between option of the Tile Mode is set to Off while the Tile the monitors is omitted. Mode set to On. Transmission Transmission [d][j][ ][Set ID][ ][Data][Cr] [d][f][ ][Set ID][ ][Data][Cr] Data 00: Off Data 0 to 32: 0 (Bottom) to 50 (Top) 01: On * Bottom/Top values depend on Tile Vertical size. Acknowledgement ** It may not be supported depending on the model. [j][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 88 CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) 52. Key (Command: m c) To check the fan errors. To send a key code of the IR remote control. Transmission Transmission [d][w][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr] Data FF: Read the status Data IR_KEY_CODE Acknowledgement Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] [c][ ][Set ID][ ][OK/NG][Data][x] Data 00: Fan fault For a key code, see the IR Code. 01: Fan OK * Some key codes are not supported depending on 02: Model without a Fan the model. 50. Temperature Value (Command: d n) 53.
  • Page 89 CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) 58. White Balance Green Gain (Command: j n) To check the Serial Numbers. To set the White Balance Green Gain. Transmission Transmission [f][y][ ][Set ID][ ][Data][Cr] [j][n][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Data 00 to FE: Green Gain 0 to 254 Acknowledgement Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] [n][ ][Set ID][ ][OK/NG][Data][x] * Data is ASCII code. 56. S/W Version (Command: f z) 59. White Balance Blue Gain (Command: j o) To check the Software Version.
  • Page 90 CONTROLLING THE MULTIPLE PRODUCT 61. PC Power Control (Command: d t) 64. Easy Brightness Control Schedule (Command: s To control the PC power if the PC and the monitor are synchronized. Sets the Easy Brightness Control Schedule. Transmission Transmission [d][t][ ][Set ID][ ][Data][Cr] [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 00: S ynchronized (When the monitor is off, the PC is 1. F1 - F6 (Data Reading Functions) also turned off.) F1: Reads the data of the 1st Easy Brightness 01: N ot synchronized (The monitor is off but the PC Control is on.) F2: Reads the data of the 2nd Easy Brightness ** It may not be supported depending on the model. Control F3: Reads the data of the 3rd Easy Brightness Acknowledgement...
  • Page 91 CONTROLLING THE MULTIPLE PRODUCT 65. Reading luminance values (Command: m u) 66. Status check (Command: s v) Reads luminance values. Check various statuses. Transmission Transmission [m][u][ ][Set ID][ ][FF][Cr] [s][v][ ][Set ID][ ][Data][ ][FF][Cr] Data 05: Check the normal operation of No.1 and Acknowledgement No.2 luminance sensors. [u][][SetID][][OK/NG][Data1][Data2][Data3][Data4][Data5][x] 06: luminance sensor being used: Data1 00-64 backlight 0-100 0 7: Check the normal operation of top, bottom, Data2 00-ff: Upper 2-byte of CA210 measured value or main temperature sensors. Data3 00-ff: Lower 2-byte of CA210 measured value Acknowledgement CA210 measured value Hex: 0000-ffff, Decimal: 0 - [v][ ][Set ID][ ][OK/NG][Data][Data1][x] 65535 When the Data is 05 Data4 00-ff: Upper 2-byte of BLU measured value Data1 0 0: All normal Data5 00-ff: Lower 2-byte of BLU measured value...
  • Page 92 CONTROLLING THE MULTIPLE PRODUCT 67. BLU Maintenance (Command: m t) Select ON/OFF of BLU Maintenance. Transmission [m][t][ ][Set ID][ ][Data][Cr] Data 00: BLU Maintenance OFF 01: BLU Maintenance ON ** It may not be supported, depending on the model. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 68. Screen mute (Command: k d) Turns the screen on or off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Turns the screen on. 01: Turns the screen off. Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 94 U.S. copyright notices are available for download. Environmental Protection Agency(EPA). LG Electronics will also provide open source code to you on CD-ROM for a charge covering As an ENERGY STAR Partner LGE U. S. A.,Inc. has...

This manual is also suitable for:

47wl30ms60wl30ms55wl30ms

Table of Contents