Installing The Phone; Connecting Network And Power Sources; Power Over Ethernet - Polycom IP 7000 User Manual

Installing the Phone

Connecting Network and Power Sources

Note
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
This section describes how to install your phone. It includes the following
topics:
• Connecting Network and Power Sources
• Connecting Optional Extension Microphones
• Connecting Optional Auxiliary Audio Components
There are four ways to connect your phone to the network and a power source.
Your system administrator can tell you which of the following methods best
suits your teleconferencing needs:
• Power over Ethernet (PoE)
• AC Power (One Phone)
• AC Power (One Phone, with Multi-Interface Module)
• AC Power (Two Phones, with Multi-Interface Module)

Power over Ethernet

Power over Ethernet is the default connection for the phone.
AC power adapters are not included in the PoE package. If you require one, see
your system administrator.
The following figure shows how to connect the phone to the network using a
PoE source.
1
Getting Started with Your Phone
on page 1-3
on page 1-7
on page 1-8
2
25-foot Network Cable
1 - 3