Accessing The Help System On Your Phone; Understanding Feature Availability; Understanding Sip Vs. Sccp - Cisco 7906G Phone Manual

If you want to...
Select a menu item
Go back one level in a menu Press Exit. (Note that if you press Exit from the top-level of a
Close a menu (and return to
the Applications menu)
Exit the Applications menu Press
After you press
Tip
menus. If you depart from an application without pressing
a new call), the phone screen display may change but the
again, the application that you were using resumes at the point when it was interrupted.

Accessing the Help System on Your Phone

The Cisco Unified IP Phone 7906G and 7911G provide a comprehensive online help system. To view
the phone help, press

Understanding Feature Availability

Depending on your phone system configuration, features included in this Phone Guide might not be
available to you or might work differently on your phone. Contact your support desk or system
administrator for information about feature operation or availability.

Understanding SIP vs. SCCP

Your phone can be configured to work with one of two signaling protocols: SIP (Session Initiation
Protocol) or SCCP (Skinny Call Control Protocol). Your system administrator determines this
configuration.
Phone features can vary depending on the protocol. This Phone Guide indicates which features are
protocol-specific. To learn which protocol your phone is using, you can ask your system administrator
or you can choose
12
Then...
Press to highlight a menu item, then press Select.
You can also press the number on the keypad that corresponds
to the number for the menu item.
menu, the menu will close.)
Press Exit one or more times until the menu closes, or press
or Exit.
the LED turns green and stays lit while you are using the Applications
,
and choose Help.
> Model Information > Call Control Protocol on your phone.
or Exit (for example, to answer
button stays green. If you press
.
OL-14584-01