Cisco 7906G Phone Manual page 63

If you want to...
Set up call forwarding
per line
Change the voice
message indicator
setting per line
Change the audible
voice message indicator
setting per line
Change or create a line
text label that appears
on your phone screen
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
Then do this after you log in...
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Line Settings.
4. In the Incoming Call Forwarding area, choose call forwarding settings
for various conditions.
5. Click Save.
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Line Settings.
4. In the Message Waiting Lamp area, choose from various settings.
Note Typically, the default message waiting setting prompts your phone to
display a steady red light from the handset light strip to indicate a new
voice message.
5. Click Save.
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Line Settings.
4. In the Audible Message Waiting Indicator area, choose from various
settings.
Note Typically, the default message waiting setting prompts your phone to
display a steady red light from the handset light strip to indicate a new
voice message.
5. Click Save.
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Line Settings.
4. In the Line Text Label area, enter a text label.
5. Click Save.
Note Your phone uses the ASCII Label field if the phone does not support
double-byte character sets.
Using the User Options Web Pages
55