Setting Do Not Disturb; Activating Do Not Disturb - Cisco 301 User Manual

Using Basic Phone Functions

Setting Do Not Disturb

STEP 3
STEP 4

Setting Do Not Disturb

NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
Press the clear softkey, then press the ok softkey.
Press the save softkey.
Using star codes:
• Enter *73 to deactivate call forwarding.
• Enter *91 to deactivate call forward busy.
• Enter *93 to deactivate call forward no answer.
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the "Setting Do Not Disturb" section on page
For the Cisco SPA 301, you can only set Do Not Disturb in the IP Phone Web
Interface or by using the star code.

Activating Do Not Disturb

Using the dnd softkey:
To activate Do Not Disturb, press the dnd softkey. The LCD screen indicates that
Do Not Disturb is turned on for your phone.
Using the Setup button:
You can also access Do Not Disturb by performing the following steps:
Press the Setup button.
Scroll to Preferences and press the select softkey.
Scroll to Do Not Disturb and press the edit softkey.
Press the y/n softkey to choose y, then press the ok softkey.
75.
3
47