Cisco 301 User Manual page 12

Getting Started
Getting to Know the Cisco SPA 301
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
# Phone Feature
2 Message
Waiting/Status
Indicator
3 Ringer button
4 Voice mail button
5 Flash button
6 Redial button
7 Volume button
8 Keypad
Description
The LED color and action indicates the phone or
message status:
• Red (solid)—You have a new voice mail
message.
• Red (fast blinking)—You have an incoming call.
• Red (slow blinking)—You have a call on hold.
• Red (series of two fast blinks)—Your phone has
temporarily lost its Ethernet connection.
• Orange (solid)—Your phone is not registered to
the call control system. This occurs when the
phone is rebooting and has not yet registered.
• Orange (fast blinking)—Your phone's firmware is
upgrading.
• Orange (slow blinking)—Your phone is
downloading firmware.
• Orange (series of two fast blinks)—Your phone
has permanently lost its Ethernet connection.
When the phone is reconnected, it will reboot.
• Green (slow blinking)—Call forwarding or Do
Not Disturb is turned on. (You will also hear an
interrupted dial tone.)
Push to the On position to turn the ringer on. Push to
the Off position to turn the ringer off.
Press to access voice mail (must be set up by your
phone system administrator).
Press to place a call on hold and open another line.
Press to redial the last number called.
Press repeatedly to increase the volume of the
handset (when the handset is off the phone) or ringer
volume (when the handset is on the phone).
Use to dial phone numbers.
1
10