Customizing Your Lcd Screen (Cisco Spa 303); Changing The Lcd Screen Contrast; Configuring The Phone Screen Saver - Cisco 301 User Manual

Using Advanced Phone Features

Customizing Your LCD Screen (Cisco SPA 303)

Customizing Your LCD Screen (Cisco SPA 303)
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
In addition, if your system administrator has configured it, you can press the same
line button (3) to speed dial Bob's extension, or to pick up a ringing call at his
extension.
You can customize your LCD screen in several ways.

Changing the LCD Screen Contrast

You can also change your LCD screen contrast from your PC using the IP Phone
Web Interface. See "Changing the LCD Contrast (Cisco SPA 303)," on page
To adjust the contrast of the LCD screen:
Press the Setup button, scroll to highlight LCD Contrast, and press the select
softkey.
Use the navigation button to adjust the screen contrast. Pressing the Left
navigation button decreases the contrast. Pressing the Right navigation button
increases the contrast.
Press the save softkey.

Configuring the Phone Screen Saver

You can enable your phone's screen saver and specify its appearance and the
amount of time for the phone to be idle before it begins. Some of these options can
be configured from your PC using the IP Phone Web Interface. See
the Phone Screen Saver (Cisco SPA 303)," on page
To configure your screen saver:
Press the Setup button.
Scroll to Screen Saver Mode and press the select softkey.
"Configuring
80.
4
80.
64