NetComm LIBERTY SERIES User Manual page 13

MAC OSX 10.4
DHCP Mode
To set your Apple Mac for DHCP mode, browse to the Apple menu and select System Preferences. In the System Preferences menu, click on
the Network icon and select Ethernet. Next select Using DHCP from the Configure drop down list. After clicking Apply, your Mac's IP Address
will now be automatically assigned from the Gateway.
STATIC Mode
If you do not wish to use automatic assignment of IP Addresses and wish to configure your Router manually, your computer must have
a static IP address within the Router's subnet. The following steps show how to configure your computer's IP address within the subnet
192.168.1.x
1. Browse to the Apple menu and select System Preferences. From the System Preferences, click the Network icon and select the
Ethernet connection.
2. From the Configure drop down list, you can set your computer to Static IP mode by selecting the "Manually" option.
3. Choose an IP address between 192.168.1.2 – 192.168.1.254 (Do not choose the Router IP of 192.168.1.1). Enter this IP address into the
field marked IP Address, and enter a Subnet Mask of 255.255.255.0
4. Set the Router and DNS server field to 192.168.1.1 (The Router's IP address).
NOTE: The IP address of the router is 192.168.1.1 (default), so the computer must be set with a different IP to the router. In the case below, the PC's IP address is set as 192.168.1.2
5. Click Apply to submit the settings.
YML10WVR2
www.netcommlimited.com
HSPA+ WIFI ROUTER WITH VOICE
HSPA+ WIFI ROUTER WITH VOICE User Guide
NETCOMM LIBERTY SERIES
13