Accessing Your Router's Configuration - NetComm NTC-6000 SERIES User Manual

Wireless M2M
Click on "Obtain an IP address automatically" and "Obtain DNS server address automatically" then click on "OK" to continue.
Click on "OK" to complete the computer preparation for the router.
2.4 Accessing your router's configuration pages
Furthermore, there are two system management accounts for maintaining the system, root and admin, each of which has slightly different
levels of management capabilities. The root manager account is empowered with full privileges while the admin manager (administrator) can
manage all settings of the router except functions like Firmware Upgrade, Device Configuration Backup and Restore and Reset router to
factory default.
To login to the router in root manager mode, please use the following login details:
To login to the router in admin manager mode, please use the following default login details.
NOTE – Whenever you make changes, please refresh your web page to prevent errors occurring due to caching.
Below illustrates the steps required to access the router's web browser configuration:
1. Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.20.1/
2. Click Login and type "admin" (without quotes) in the Username and Password fields. Then click on Submit.
NTC-6000 Series User Guide
14
http://192�168�20�1
root
USERNAME:
PASSWORD: admin
http://192�168�20�1
USERNAME: admin
admin
PASSWORD:
YML6000
www.netcomm.com.au