NetComm NTC-6000 SERIES User Manual page 43

Send Ack� SMS for Set Command
Enable or disable sending an acknowledge message after execution of a "Set" command.
If disabled the router does not send any acknowledgement after execution of a "Set" command. This can be useful to determine if a
command was received and executed by the router. This is disabled by default.
Send Ack� SMS to
Select destination to send an acknowledgement message to after the execution of a "Set" command.
If "Fixed Ack. SMS Number" is selected, the acknowledgement message will be sent to the predefined number in the "Fixed Ack. SMS
Number" field.
If the SMS Sender Number is selected, the acknowledgement message will be sent to sender directly. The default setting is to use "SMS
Sender Number".
Fixed Ack� SMS Number
The destination number to which acknowledgement messages are sent after the execution of a "Set" command.
Send Error SMS for Get/Set/Exec Command
Enable or disable the sending of an error message resulting from the execution of a Get/Set/Exec command.
If disabled, the router does not send any error notifications after the execution of a Get/Set/Exec command.
This function is disabled by default.
Send Error SMS to
Select the destination of the error messages from the execution of a Get/Set/Exec command.
If "Fixed Number" is selected, any error messages will be sent to the predefined number in the "Fixed Error SMS Number" field.
If "SMS Sender Number" is selected, any error messages will be sent to the sender directly.
The default setting is to use "SMS Sender Number".
Fixed Error SMS Number
The destination number to which error messages from the execution of a Get/Set/Exec command should be sent.
Max� Diag� SMS Tx Limit
You can set the maximum number of acknowledgement and error messages sent when an SMS Diagnostics and/or Command is
executed. You can set the maximum limit on a per hour/day/week or month basis.
The default is to send a maximum of 100 messages per day.
You can check the current sent message count by looking next to the "Max. Diag. SMS Tx Limit" field. If the maximum number has been
exceeded, you can also reset sent the message counter by pressing the "Reset" button.
The Total transmitted message count resets after a reboot or at the beginning of the time frame specified.
Please note: Times displayed are in UTC format.
For example:
If the time frame is set to "HOUR" and the current time is "04:30", then the counter will reset to zero at "05:00".
If time frame is set to "DAY" and current date and time is "04:30" 17th of March, then the counter will reset to zero at "00:00" 18th
of March.
If time period is set to "WEEK" and current date and time is "04:30" Saturday, then the counter will reset to zero at "00:00" on the
coming Monday.
If time period is set to "MONTH" and current date and time is "04:30" 17th of March, then the counter will reset to zero at "00:00"
1st of April.
YML6000
www.netcomm.com.au
NetComm CallDirect™ Series - NTC-6000 Series
NTC-6000 User Guide
43