NetComm NTC-6000 SERIES User Manual page 51

Click "Login" and type "root" in the Username and and "admin" in the Password fields (without quotes). Then click on "Submit". The banner
at the top of the page should be different to show that the router is currently in recovery console mode.
To upload the main system software, click on "Application Installer" from the menu at the top of the page and then click on the browse
button and navigate to where the main system image upgrade file is located on your computer]
Once you have selected the recovery image file to use, click Upload to upload the file. You will then see a progress bar as shown in the
screenshot below. The upload has finished when the status bar reaches 100% and the "Phase:" has changed to Complete.
When the upload has completed, the screen should refresh and list the file you have just uploaded. Click on the "Install" link to the right
of this.
Once you see "Done" shown as per the screenshot below, click on "Reboot" at the top of the page and then click the "Reboot" button to
restart the router
The router will now start up with the new system software loaded.
YML6000
www.netcomm.com.au
NetComm CallDirect™ Series - NTC-6000 Series
NTC-6000 User Guide
51