Gps - NetComm NTC-6000 SERIES User Manual

8.7

GPS

This facility is available by clicking on the "Services" menu followed by the "GPS" menu item on the right.
The built-in GPS module enables you to utilise location based services, keep track of hardware out in the field or find your current location.
The GPS Status window provides up to date information about both the routers current location and the current GPS signal conditions
(position dilution of precision (PDOP), horizontal dilution of precision (HDOP) and vertical dilution of precision (VDOP)).
Select to "Enable" GPS Operation and an appropriate update interval depending on how quickly you would like the current GPS position
information updated.
Click "Save" to save your GPS settings.
The "GoogleMaps" button provides a quick short cut to show your routers current position on a map, while the "Clock Sync" button
enables you to quickly synchronise your routers time from the GPS service.
Because GPS positioning relies on accurate clock settings to obtain the correct information about your location, the "ClockSync"
button enables you to quickly set your routers clock to the correct time. This ensures you will always have the correct GPS position
information available.
MS Assisted GPS enables the router to quickly and efficiently obtain location information by querying the cellular network for current GPS
satellite and location information.
Please note: GPS functionality is available in the NTC-6908 and NTC-6908S only, from firmware version 1.6.0 onwards
YML6000
www.netcomm.com.au
NetComm CallDirect™ Series - NTC-6000 Series
NTC-6000 User Guide
37