Knob Assign - Kawai MP11 Owner's Manual

EDIT Menu parameters


Knob Assign

The Knob Assign screen is used to assign MIDI Control Change or Aftertouch messages to the four main control
knobs A, B, C, and D for direct, real-time adjustment in Play Mode. Two groups of knob parameters (primary and
secondary) can be assigned to each of the four MIDI zones, providing extensive control over external MIDI devices.
 A ssigning MIDI CC/Aftertouch messages to each knob
Enter the Knob Assign screen for the desired MIDI zone.
Turn the four control knobs (A, B, C, D) to specify which MIDI CC
message should be assigned to each control knob.
MIDI CC messages can also be assigned by using the CURSOR
buttons to move the selection cursor, and +/YES or –/NO
buttons to increase or decrease the values.
 arrow:
Next page
Press the F1~F4 buttons (depending on the selected MIDI zone)
to show the secondary group of knob parameters in the LCD
display.
* For more information about adjusting parameters in Play Mode, please
refer to page 21.

(MIDI)
Page 1/2
Page 2/2