Usb Menu Functions; Load - Kawai MP11 Owner's Manual

USB Menu functions
1

Load

These functions allow data stored on a USB memory device to be loaded into the instrument's internal memory.
Load functions will overwrite the existing data stored in internal memory.
Exercise caution when using these functions in order to prevent accidental data loss.
1. Load One Sound
This function loads a SOUND file stored on a USB memory,
replacing the preset parameters for that specific sound.
After selecting this function, select the desired SOUND file
from the file/folder listing screen.
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.
* After loading, the SOUND will be selected automatically, and all other
sections will be turned OFF. SETUPs will also be turned OFF.
3. Load SMF
This function loads an SMF song file stored on a USB memory
device into the MP11's internal song recorder memory.
After selecting this function, select the desired SMF file from
the file/folder listing screen. Then use the control knobs A, C,
and D to specify the destination song memory and keyboard/
drum channels.
Song
memory
Keyboard
channel
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.
* After loading, the MIDI record/playback screen will be shown in the LCD
display and the destination song memory will be selected automatically.
* For more information about the song recorder, please refer to page 64.
5. Load All Setup
This function restores all SETUP memories from an All Setup file
stored on a USB memory device.
After selecting this function, select the desired All Setup file
from the file/folder listing screen.
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.
2. Load One Setup
This function loads a SETUP file stored on a USB memory device
into one of the MP11's 208 SETUP memories.
After selecting this function, select the desired SETUP file from
the file/folder listing screen. Then press the BANK and SETUP
memory buttons to specify the destination SETUP memory.
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.
* After loading, the SETUP will be selected automatically.
4. Load All Sound
This function replaces the preset parameters for all internal
sounds from an All Sound file stored on a USB memory device.
After selecting this function, select the desired All Sound file
from the file/folder listing screen.
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.
Drum
channel
6. Load All Backup
This function restores the parameters for all SETUP memories,
SOUND parameters, and SYSTEM settings from an All Backup
file stored on a USB memory device.
After selecting this function, select the desired All Backup file
from the file/folder listing screen.
Finally, press the F2 or F3 function buttons to confirm or cancel
the load operation.