Storing A Setup - Kawai MP11 Owner's Manual

Overview of the STORE Button
2

Storing a SETUP

This function will store all the EDIT menu parameters for the PIANO, E.PIANO, SUB, and MIDI OUT sections, panel
button and knob states, and EQ settings to one of the MP11's 20 SETUP memories.
1. Entering the STORE screen
Press the STORE button.
The LED indicator for the STORE button will turn ON, and the
store selection screen will be shown in the LCD display.
2. Selecting the Store Setup function
Press the F2 button (SETUP) to select the Store Setup function,
then press the F4 button (EXEC).
The Store Setup screen will be shown in the LCD display.
SETUP
selected
3. Naming the SETUP, selecting the bank/memory
Turn control knobs A and B to move the cursor position and
select the characters for the SETUP name.
Press the BANK   buttons and SETUP memory buttons (1~8)
to select the bank and memory for the new SETUP.
SETUP
memory
Press the F4 function button (EXEC).
The Store Setup confirmation screen will be shown in the LCD
display.
4. Confirming the Store Setup operation
Press the F2 button (YES) to confirm the Store Setup operation,
or the F3 button (NO) to return to the previous screen.
* The existing SETUP memory will be overwritten with the new SETUP.
* The +/YES and –/NO buttons can also be used to confirm or cancel the
store operation.
* When the SETUP has been stored and the SETUP button has been turned
OFF, the panel settings will return to the POWERON state.
0
Move cursor
position
SETUP
name
Example: To select SETUP memory C-2, press the BANK
button twice, then press the
LED indicator ON:
STORE mode is selected
memory button.
F2 button: F3 button:
YES: Confirm NO: Cancel
Select
character