Overview Of The Edit Menu - Kawai MP11 Owner's Manual

Overview of the EDIT Menu
The EDIT menu can also be used to adjust parameters for the MIDI OUT section. As with the sound section EDIT
menus, the parameters are grouped by category, providing direct control over any connected MIDI devices.
This collection of parameters, together with other adjustable settings, can be stored as a SETUP memory (page 0).
The MP11 provides 2 banks x  setups, for a total of 20 user programmable SETUP memories.
 A bout Common parameters ( icon)
Unless stated, parameter settings for the MIDI OUT sections can be adjusted independent for each ZONE1~ZONE4.
However, parameters marked with a
parameter for ZONE1 will automatically change the Right Pedal Assign parameter for ZONE2~ZONE4.
As noted previously, the Split Point parameter is unique in that it is common for all three sound sections and four MIDI zones.
 A bout System parameters (
MIDI OUT section parameters marked with a
use the STORE function.
 MIDI OUT section parameters
No. Category
1 Channel/Program MIDI Transmitting Channel, Program, Bank MSB, Bank LSB
2 SETUP
3
Transmit
4 MMC
5 Key Setup
6 Controllers
7 Knob Assign
 E ntering the EDIT Menu
When MIDI OUT ZONE1~ZONE4 is selected:
Press the EDIT button.
The LED indicator for the EDIT button will turn ON, and the
Edit Menu for the selected MIDI zone will be shown in the LCD
display.
MIDI
ZONE1
selected
2
icon are common for all four MIDI zones. For example, changing the
icon)
icon are SYSTEM parameters and memorised automatically, without the need to
Parameters
Send Program, Send Bank, Send Volume, Send Knobs
Transmit System Exclusive, Transmit Recorder
Transmit MMC, MMC Device ID, MMC Commands
Key Range Type, Split Point, Key Range Zone Lo, Key Range Zone Hi, Octave Shift, Touch Curve,
Zone Transpose, Key Scaling Damping, Key Scaling Key, Dynamics, Solo, Solo Mode, Transmit Keyboard
Right Pedal, Right Pedal Assign, Half Pedal Values, Center Pedal, Center Pedal Assign, Left Pedal,
Left Pedal Assign, Pitch Bend, Pitch Bend Range, Modulation Wheel, Modulation Wheel Assign,
Expression Pedal, Expression Pedal Assign
Knob A Assign, Knob B Assign, Knob C Assign, Knob D Assign,
Knob2 A Assign, Knob2 B Assign, Knob2 C Assign, Knob2 D Assign
(MIDI OUT)
* To change the selected MIDI zone, press the F1~F4 buttons.
Right Pedal Assign
LED indicator ON:
EDIT mode is turned ON