Knob Assign - Kawai MP10 Owner's Manual

11. Foot Switch
This parameter determines whether or not the foot switch
pedal is active for the selected section.
* For more information about connecting pedals, please refer to page 14.
Assignable functions for modulation wheel, expression pedal, & foot switch
PIANO/E.PIANO/SUB sections
Modulation
Panpot
Expression
Damper
Sostenuto
Soft
Resonance
Cut off
7

Knob Assign

The Knob Assign screen is used to assign EDIT menu parameters to the four main control knobs A, B, C, and D
for direct, real-time adjustment in Play Mode. Two groups of knob parameters (primary and secondary) can be
assigned to each PIANO, E.PIANO, SUB, and MIDI section, providing extensive control over the selected sounds.
Assigning parameters to each knob
Enter the Knob Assign screen for the desired section.
Turn the four control knobs (A, B, C, D) to specify which parameter
should be assigned to each control knob in Play Mode.
* Press the CURSOR or CURSOR
primary and secondary control knob groups.
* For more information about adjusting parameters in Play Mode, please
refer to page 19.
/
ON OFF
PIANO/SUB sections only
EFX Dry/Wet
EFX Parameter 1
EFX Parameter 2
buttons to alternate between the
12. Foot Switch Assign
This parameter determines the function of the foot switch
pedal. This is a common parameter for all three sound sections,
where the default function is Sostenuto.
The MIDI section is controlled independently, and can be
assigned a CC# 0-119 or an after touch command.
* Please refer to the end of this section for a list of assignable functions.
* This parameter is common for all three sound sections.
The MIDI section is separate, and controlled independently.
E.PIANO section only
EFX1 Dry/Wet
EFX1 Parameter 1
EFX1 Parameter 2
EFX2 Dry/Wet
EFX2 Parameter 1
EFX2 Parameter 2
/ : 11
PIANO SUB FUNCTIONS
. : 14
E PIANO FUNCTIONS
: 0 - 119,
MIDI AFT
43